quantum new line 350 series cutting line

starting at $75,000


Request Quote

TECHNICAL DATA:

New automatic CNC cutting Line Mod. NEW LINE 350 for 90° cuts, suitable for cutting hollow or solid bars with round, square or rectangular section featuring automatic loading and unloading of pieces and made up of the following: 

Capacities:

  • Round Tube: 4" O.D.
  • Square Tube: 3.125" Square
  • Rectangular Tube: 2.25"H x 3.125"W
  • Minimum Cutting Capacity: 0.63"ø / 0.63" x 0.63"
  • Minimum Cutting Length: 0.80"
  • Maximum Cutting Length: 9'-10" / 118"
Name *
Name
Phone *
Phone

Specifications:

  • Blade Size Diameter: 14" / 350mm
  • Blade Bore Size Diameter: 32mm
  • Maximum Vice Opening: 4.40" x 112mm
  • Vice Jaw Height: 2.75" / 70mm
  • Blade Rotation: 50 - 100 R.P.M.
  • Bar Feed Speed: 10 - 90 Meters per Minute
  • Worktable Height: 43.7" / 1,110mm
  • Unloading Height (Front / Rear): 27.5" / 700mm
  • Weight: 4,410 lbs.

 

  • "CI" type automatic loader with inclined worktable designed for loading hollow or solid bars with round, square or rectangular section; rapid centralized adjustment of bar dimensions by means of just two hand wheels, or "CF" type automatic bundle loader with anti-overlapping device for hollow or solid bar loading with round, square or rectangular section; rapid centralized adjustment of bar dimensions by means of just two hand wheels.
  • Bar feed unit supplied with rollers and driven by a gear motor assisted by an inverter controlling rapid feed speed and the associated acceleration and deceleration ramps for bar feeding.
  • Cutting head with 2-speed electric motor, motor amperometric absorption control, tempered and ground oil-bathed reducing gears, cutting head downstroke speed adjustment, blade double lubrication system (with emulsifiable oil or oil microlubrication).
  • Bar locking with double vice and pressure adjustment of bar feed rollers and double vice.
  • Bar stop with digital instrument displaying bar cutting length, vertically movable stop retainer providing maximum accuracy of cutting repeatability.
  • Automatic unloader provided with inclinable table for the selection of the side from which faced, cut or end-trimmed pieces are unloaded.
  • New programming instrument with 5" backlit graphic display for the management and optimisation of cutting parameters and settings.

 

OPTIONAL EQUIPMENT:

  • Extra bar stop adding a second cutting size option in sequence.
  • Blade rotation inverter for speed variation according to the type of the material to be cut.
  • Cutting-head with inclined linear movement, suitable for cutting square and rectangular pipes, with an entry into the bar which reduce at the minimum the frazes.
  • Inclined vice of 45°, for a better blocking of the piece to cut.