C3006: 10 Foot Hydraulic Shear with CNC Control

DSC_9446.jpg
DSC_9447.jpg
DSC_9448.jpg
DSC_9449.jpg
DSC_9450.jpg
DSC_9452.jpg
DSC_9454.jpg
DSC_9456.jpg
DSC_9458.jpg
DSC_9460.jpg
DSC_9462.jpg
DSC_9464.jpg
DSC_9469.jpg
DSC_9470.jpg
DSC_9477.jpg
DSC_9446.jpg
DSC_9447.jpg
DSC_9448.jpg
DSC_9449.jpg
DSC_9450.jpg
DSC_9452.jpg
DSC_9454.jpg
DSC_9456.jpg
DSC_9458.jpg
DSC_9460.jpg
DSC_9462.jpg
DSC_9464.jpg
DSC_9469.jpg
DSC_9470.jpg
DSC_9477.jpg

C3006: 10 Foot Hydraulic Shear with CNC Control

41,300.00

$41,300

The last generation of NARGESA CNC Vertical cut shears are made of stabilized, welded steel that allows to take on big jobs without deformation.

Cutting length: 10' / 3030mm. 
Max. thickness in steel: 0.25" / 6.35mm. 
Max. thickness in S.S.: 0.15" / 4mm.

Add To Cart
 
 
3+Year+Warranty.png

ADVANTAGES OF VERTICAL CUT INSTEAD OF SWING CUT:

Energetic saving:
Resistance of material in vertical cut is much lower, which becomes a considerable energetic saving.

Cutting quality:
Clean, perfect and accurate cut.

Life of the blades:
The blades wear is almost nule. The life of the blades is 4 times higher than other shearing systems.

  • Strokes per minute: 12 Strokes. (All length)   
  • Independent hydraulic rammers: 15 units.   
  • Millimeter squaring arm, 1000mm length.   
  • Two 1000mm-millimetered stand arms.   
  • Fix cut inclination: 1,75º   
  • Cutting area lit up by leds.   
  • Driving with safety pedal and emergency stop.   
  • Back overture with safety optoelectronic devices.  
  • Motor power: 9,2 KW/ 12 HP  
  • Hydraulic Pump: 22 liters.   
  • Container capacity: 96 liters.   
  • Cutting length: 3030mm.
  • Cutting capacity: 6mm in steel (450N/mm2)andy 4mm in S.S.(700N/mm2)
  • CNC back gauge.
  • Digital display.   
  • Gauge displacemnt: 700mm.   
  • Accuracy and repeatability of positioning from +/- 0,1mm.   
  • 4-edged lower and upper blades Suitable for stainless steel.   
  • Goose neck for cuts with bigger length: 173mm.   
  • Thin marking zone for manual cutting.