MC150B: NARGESA Section and Pipe Bending Machine
MC150B: NARGESA Section and Pipe Bending Machine
Ready to place an order, or do you have any questions?
Call us at (704) 703-9400
Price: $9,137
Electrical Options:
- 220V / 3PH / 60Hz
- 480V / 3PH / 60Hz
- 220V / 1PH / 60Hz
Section and pipe bending machine MC150B QUANTUM NARGESA. Our pipe bender MC150B is designed to minimize the manufacturing cost and provide maximum performance when bending pipes and profiles. It has been manufactured for different profiles such as flat bar or bar section, T-profile, rolling U-profile, bending angle, bending solid rod, both square and round types, spiral tube or even to perform square, rectangular or round pipe in different materials: iron, carbon steel, stainless steel, brass, copper, aluminum. The purpose of these bending operations varies from making greenhouses, tables, chairs, car guards, doors, windows, railings, fences up to countless metal products.
All Nargesa products are manufactured in our facilities in Spain. Hydraulic and electrical components are completely standard and from the the best leading European trademarks which have technical support all around the world: Rexroth, Bosch, Roquet, Schneider Electric, LG, Telemecanique, Pizzato etc...
The MC150B Features and Specifications:
Two drive rollers. The two lower rollers are motorized and knurled for better grip.
Secure transmission by using flat hardened pinions.
Diameter of axes: 1.5".
Useful axes length: 2.9".
Center distance between lower axes: 9".
Maximum capacity for bending round pipe: 2 inches or 50 mm.
Bending regulation by the upper shaft, which allows to curve tube and profile dimensions and profiles of large diameter without deformation.
We supply the section bending machine MC150B with 9 rollers and standard washers, that can be combined and make all kinds of profiles. (Square pipe, rectangular, square bar, round and rectangular bars, U profile, T profile, angle, flat bar, edged bar ...) It is only for special round pipes when we need special rollers.
Millimeter scale for bending in the upper shaft.
Two working positions, horizontal and vertical in the same workbench.
Correction rollers on the sides to control the bending deformation when making spirals and spiral staircases.
Base cupboard for rollers and accessories.
Motor Power: 0.75 KW / 1 HP
Voltage supply: 3 phased 230/400 V or 230 V 1 phased (For other voltages, contact the manufacturer)
Rollers speed: 6 RPM
Lower bench palletized to easily transport the machine to the workplace or store it in case of lacking space.
The machine is shipped fully assembled, you only need to connect it to the power supply.
Palet made of steel and 3 layer cardboard box suitable for seafreight.
Optional: Fumigated wooden box NIMF15
