S-410 AE: Fully-Automatic 16" Horizontal Band Saw

DSC_8080.jpg
DSC_8093.jpg
DSC_8113.jpg
DSC_8160.jpg
DSC_8158.jpg
DSC_8173.jpg
DSC_8176.jpg
DSC_8179.jpg
DSC_8184.jpg
DSC_8185.jpg
DSC_8188.jpg
DSC_8202.jpg
DSC_8209.jpg
DSC_8211.jpg
DSC_8218.jpg
DSC_8223.jpg
DSC_8164.jpg
DSC_8165.jpg
DSC_8167.jpg
DSC_8168.jpg
DSC_8115.jpg
DSC_8118.jpg
DSC_8122.jpg
DSC_8136.jpg
DSC_8140.jpg
DSC_8145.jpg
DSC_8148.jpg
DSC_8161.jpg
DSC_8080.jpg
DSC_8093.jpg
DSC_8113.jpg
DSC_8160.jpg
DSC_8158.jpg
DSC_8173.jpg
DSC_8176.jpg
DSC_8179.jpg
DSC_8184.jpg
DSC_8185.jpg
DSC_8188.jpg
DSC_8202.jpg
DSC_8209.jpg
DSC_8211.jpg
DSC_8218.jpg
DSC_8223.jpg
DSC_8164.jpg
DSC_8165.jpg
DSC_8167.jpg
DSC_8168.jpg
DSC_8115.jpg
DSC_8118.jpg
DSC_8122.jpg
DSC_8136.jpg
DSC_8140.jpg
DSC_8145.jpg
DSC_8148.jpg
DSC_8161.jpg

S-410 AE: Fully-Automatic 16" Horizontal Band Saw

50,000.00

$50,000

(909)476-8007

The Quantum Special 410 AE band saw machine has excellent cutting performances on a wide range of materials. The project of this machine has been focused on making the use very simple; thanks to the numeric control with material libraries Special 410 AE automatically set the right cutting parameters, while the total enclosure has been designed to guarantee an easy access to the machine. Special 410 AE has also a very rich standard equipment. 

Add To Cart
 
 

 

  • Serial Number: 108065
  • Rated at 480 Volt / 3 Phase / 60Hz
  • Cutting Capacity: 16” Solid Round and 16" Solid Square.
  • PLC machine logic with touch screen HMI interface and remote service connection to manufacturer service engineers, to reduce service time & costs.
  • Fully enclosed design to assure the highest safety and a clean working area. With respect of full accessibility for daily and extraordinary service.
  • Programmable Hydraulic Bow Descent equipped with Cutting Detour Control.
  • Start without Primecut.
  • Equipped with Extra Power Kit.
  • Head movement on linear ball bearings.
  • Hydraulic band tension.
  • Automatic hand feed regulation, according to the cross section and shape of material.
  • Automatic movable band guide to keep blade guiding as close as possible to the material to cut.
  • Index movement by precision ball screw and electrical motor.
  • Automatic chip conveyor.
  • Power driven band cleaning brush.
  • Carbide faced saw guides with large diameter lead in rollers on both guide arms.
S-410AE.JPG

The basic characteristics of the machine (such as rigidity of the blade support, flywheel dimensioning, band guides, and band stretching) have been thoroughly studied to avoid yielding of the band, increase its durability, and improve linearity and time of cutting.