Spacer

S 285 M: Manual Band Saw

Special_285+M+2014+w+no+background.png
Special_285+M+2014+w+no+background.png

S 285 M: Manual Band Saw

4,300.00

PRICING STARTS AT $4,300

The basic characteristics of the machine (such as rigidity of the blade support, flywheel dimensioning, band guides, and band stretching) have been thoroughly studied to avoid yielding of the band, increase its durability, and improve linearity and time of cutting.

Add To Cart
 
 

Apply for Credit today and see how much you qualify for within minutes!


QUANTUM MACC S 285 M CUTTING CAPACITIES AND SPECS:

  • Round Tube Cutting at 90° - 8.6"
  • Round Tube Cutting at 45° - 6.3"
  • Round Tube Cutting at 60° - 3.9"
  • Square Tube Cutting at 90° - 8.5"
  • Square Tube Cutting at 45° - 5.9"
  • Square Tube Cutting at 60° - 3.3"
  • Rectangular Tube Cutting at 90° - 6.1" x 9.8"
  • Rectangular Tube Cutting at 45° - 4.3" x 6.2"
  • Rectangular Tube Cutting at 60° - 3.15" x 3.7"

Maximum Vice Opening - 315mm(12.4")
This saw can run at 2 different speeds (32-66 R.P.M.)

Here are a few notable features of the SPECIAL 285 M:

  • Vertical rotation on bolt with adjustable tapered bearings without backlash.
  • High-capacity band control by two-speed motor and special reducer with bronze gear and tempered and ground worm screw.
  • Appropriately dimensioned flywheels.
  • Strong band guides with tight stress-raiser bearings and adjustable widia tips.
  • Band stretching is obtained by electro-mechanical blade tensioner with microswitch.
  • Vice with a device for swift locking by eccentric means.
  • Accident-preventing devices on the flywheel casing, on the control handle, and on the blade.
  • Cutting thickness 1.2 mm.
  • Adjustable stop for cuts of the same size.
  • 24 V low tension plant.
  • Cutting range 0° - 60° right
  • 0,06 kW power-driven pump for band cooling.

REQUEST QUOTE FOR THE S 285 M: MANUAL PIVOT-STYLE BAND SAW

Name *
Name
Phone *
Phone
What is the material type , profile, and size (overall size and thickness) that you will be cutting? We ask this, only to ensure that this unit will be best suited for your applications, since we offer such a wide range of saws to choose from.