Spacer

S 350 A: Fully-Automatic, Double Column Band Saw for Straight Cuts (13-3/4" Round Tube Capacity)

Scheda-SPECIAL-350-A-Quantum-S350A.png
Scheda-SPECIAL-350-A-Macc_Page_2_Image_0004.jpg
Scheda-SPECIAL-350-A-Quantum-S350A.png
Scheda-SPECIAL-350-A-Macc_Page_2_Image_0004.jpg

S 350 A: Fully-Automatic, Double Column Band Saw for Straight Cuts (13-3/4" Round Tube Capacity)

63,400.00

Ready to place an order, or do you have any questions?
Call us at (909) 476-8007

The Quantum MACC S 350 A: Fully-Automatic, Double-Column Band Saw was manufactured with the focus on simplicity of use for the operator. This unit is equipped with a CNC Control Panel for the management of the parameters and of all the “cutting settings”. The essential basic characteristics of our Quantum S-350-A Fully-Automatic, Double-Column Band Saw (such as the rigidity of the blade support, the flywheel dimensioning, band saw blade guides, and band stretching) have been extensively studied thoroughly in order to avoid yielding of the band - ultimately increasing the S-350-A’s durability above all other band saws of this size in the marketplace, and assists to improve the linearity of the cuts, as well as the cutting time. This unit is equipped with a Variable Speed Inverter and a Vice Pressure Regulator.

The CNC Control Panel can hold up to 39 programs, each of them can contain up to 60 steps - for an overall number of steps equaling 2,340 cutting steps/positions - also equipped with a piece counter.

Equipped with Touchscreen CNC Control, Vertical Vice, Detour Control, Trim Cut Set Up and Vice Pressure Regulator.

Click Here to Pre-Order

QUANTUM MACC S-350-A BAND SAW CUTTING OPERATIONS AND CAPACITIES:

Operation:
Cycle start is obtained by pressing the relevant start button. 

The machine performs the following operations during the cutting cycle: 

  1. Material Feeding via Step-Feeder.

  2. Vice closing and activation of band motor. (Fixed vice lock.)

  3. Rotation of the blade and delivery of the coolant.

  4. Head/Bow Down Feed until the finishing of the cut.

  5. Feeding carriage will return until the it reaches the programmed location.

  6. Head/Bow Return to initial position. Blade Revolution and Coolant Delivery will stop.

  7. Vice will open.

  8. Cycle Repetition.

Round Tube Cutting Capacities:
Round Tube Cutting at 90° (Straight Cut): 13-3/4”

Solid Round Cutting Capacities:
Solid Round Cutting at 90° (Straight Cut): 12-1/2”

Square Tube Cutting Capacities:
Square Tube Cutting at 90° (Straight Cut): 13-3/4"

Solid Square Cutting Capacities:
Solid Square Cutting at 90° (Straight Cut): 12-1/2"


Notable Features/Specifications:

  • Equipped with Touchscreen CNC Control, Vertical Vice, Detour Control, Trim Cut Set Up and Vice Pressure Regulator.

  • The S 350 A has a fully enclosed design in order to guarantee the highest safety and a clean and healthy work place, all the while, allowing easy access to the inward sections/parts of the machine.

  • The index movement is executed by the use of a precision ball screw and electrical motor.

  • The same frame descends on a two/dual post/column system with linear guides and re-circulation ball guides.

  • The movable blade guide has automatic positioning in order to keep the blade guides as close as possible to the material for cutting efficiently.

  • A Hydraulic Blade-Tightening System is placed on the idle wheel.

  • This unit is equipped with carbide tip inserts and large diameter bearings on both blade guide units..

  • Cutting Range: 90° Straight Cuts

  • Cutting Thickness: 1.2 mm (0.047")

  • Band Saw Weight: 4,450 lbs. (2,000 kg)

  • Adjustable Stop for cuts of the same size.

  • Maximum Vice Opening of 360 mm (14.17”)

  • This saw can run at 2 different speeds (15-100 Feet per Minute)

  • Pedestal with chip collection tray and removable tank for coolant.

  • Blade Size Dimensions: 4900 x 34 x 1.1 mm (193" x 1.33" x 0.043")

  • Electrical Options Available: 220 Volt / 3 Phase, 480 Volt / 3 Phase

  • 0.06 kW Power-Driven Pump for band cooling and 24V Low-Tension Plant.

  • Strong band guides with tight stress-raiser bearings and adjustable widia tips.

  • Band stretching is obtained by electro-mechanical blade tensioner with micro switch.

  • Accident-preventing devices on the flywheel casing, on the control handle, and on the blade.

  • Italian Made Band Saw - Parts for our Band Saws are stocked in the U.S.A. at our Quantum Machinery headquarters.

  • S-350-A Band Saw Overall Dimensions: 85" Height x 91" Length x 63" Width (2150 x 2300 x 1600mm Width)


REQUEST QUOTE FOR THE S 350 A: FULLY-AUTOMATIC, DOUBLE COLUMN BAND SAW

Name *
Name
Phone *
Phone
What is the material type , profile, and size (overall size and thickness) that you will be cutting? We ask this, only to ensure that this unit will be best suited for your applications, since we offer such a wide range of saws to choose from.

QUANTUM BAND SAWS CURRENTLY IN OUR "IN-STOCK SPECIALS" AND READY FOR IMMEDIATE SHIPMENT


 
 

Apply for Credit today and see how much you qualify for within minutes!