Spacer

NEW 250 DV: 10" Manual Circular Cold Saw

New 250 DV (17).jpg
New 250 DV (2).jpg
New 250 DV (7).jpg
New 250 DV (8).jpg
New 250 DV (9).jpg
New 250 DV (5).jpg
New 250 DV (6).jpg
New 250 DV (10).jpg
New 250 DV (12).jpg
New 250 DV (13).jpg
New 250 DV (11).jpg
New 250 DV (23).jpg
New 250 DV (24).jpg
New 250 DV (25).jpg
New 250 DV (26).jpg
New 250 DV (27).jpg
New 250 DV (31).jpg
New 250 DV (4).jpg
New 250 DV (17).jpg
New 250 DV (2).jpg
New 250 DV (7).jpg
New 250 DV (8).jpg
New 250 DV (9).jpg
New 250 DV (5).jpg
New 250 DV (6).jpg
New 250 DV (10).jpg
New 250 DV (12).jpg
New 250 DV (13).jpg
New 250 DV (11).jpg
New 250 DV (23).jpg
New 250 DV (24).jpg
New 250 DV (25).jpg
New 250 DV (26).jpg
New 250 DV (27).jpg
New 250 DV (31).jpg
New 250 DV (4).jpg

NEW 250 DV: 10" Manual Circular Cold Saw

2,650.00

$2,650

 

The Quantum NEW 250 DV Manual Cold Saw has the capability of moving the head 45 degrees left and 45 degrees right. The reduction unit is in oil bath with a membrane pump for coolant and coolant filter. The NEW 250 DV is equipped with a double-vice and counter-vice that comes complete with an anti-burr device and bar stop. Service tools come with the machine, as well as the machine's manual and steel pedestal. The NEW 250 DV is to be equipped with a 250mm blade ($70 Value).

  • Maximum vice opening - 100mm (4")
  • This saw can run at 2 different speeds (40-80 R.P.M.)
  • Machine can be brought in rated at either 220 Volt / 3 Phase or 480 Volt / 3 Phase
Add To Cart

NEW 250 DV Cutting Capacities:

  • Solid Round Cutting at 90 Degrees - 1.5"
  • Solid Round Cutting at 45 Degrees - 1.35"
  • Round Tube Cutting at 90 Degrees - 2.75"
  • Round Tube Cutting at 45 Degrees - 2.5"
  • Square Tube Cutting at 90 Degrees - 2.75"
  • Square Tube Cutting at 45 Degrees - 2.15"
  • Rectangular Tube Cutting at 90 Degrees - 3.7"W x 2.15"H
  • Rectangular Tube Cutting at 45 Degrees - 2.3"W x 1.9"H