New 300 DV: 12" Manual Circular Cold Saw

DSC_3870.jpg
DSC_3866.jpg
DSC_3868.jpg
DSC_3871.jpg
DSC_3859.jpg
DSC_3837.jpg
DSC_3839.jpg
DSC_3841.jpg
DSC_3842.jpg
DSC_3848.jpg
DSC_3849.jpg
DSC_3852.jpg
DSC_3853.jpg
DSC_3854.jpg
DSC_3855.jpg
DSC_3836.jpg
DSC_3864.jpg
DSC_3863.jpg
DSC_3870.jpg
DSC_3866.jpg
DSC_3868.jpg
DSC_3871.jpg
DSC_3859.jpg
DSC_3837.jpg
DSC_3839.jpg
DSC_3841.jpg
DSC_3842.jpg
DSC_3848.jpg
DSC_3849.jpg
DSC_3852.jpg
DSC_3853.jpg
DSC_3854.jpg
DSC_3855.jpg
DSC_3836.jpg
DSC_3864.jpg
DSC_3863.jpg

New 300 DV: 12" Manual Circular Cold Saw

3,600.00

$3,600

 

The Quantum Machinery NEW 300DV Manual Cold Saw has the capability of moving the head 45 degrees left and 45 degrees right. The reduction unit is in oil bath with a membrane pump for coolant and coolant filter. The NEW 300DV Cold Saw is equipped with a sliding, quick locking counter-vice for longitudinal cutting. This unit is also equipped with a Jet Separation System to keep the blade oiled, has a Bar Support Arm, and a Bar Stop. Service tools come with the machine, as well as the saw's manual and steel pedestal. The NEW 300 DV can be equipped with a 315mm blade.

  • This saw can run at 2 different speeds (40-80 R.P.M.)
  • Maximum vice opening - 120mm (4.7")
  • Machine is rated at 220 Volt / 3 Phase / 60Hz
Add To Cart

NEW 300 DV Cutting Capacities

  • Solid Round Cutting at 90 Degrees - 2.1"
  • Solid Round Cutting at 45 Degrees - 2"
  • Round Tube Cutting at 90 Degrees - 3.5"
  • Round Tube Cutting at 45 Degrees - 3.15"
  • Square Tube Cutting at 90 Degrees - 3.15"
  • Square Tube Cutting at 45 Degrees - 2.75"
  • Rectangular Tube Cutting at 90 Degrees - 4.5"W x 2.75"H
  • Rectangular Tube Cutting at 45 Degrees - 2.75"W x 2.6"H