TRS 275: 11" Manual Circular Cold Saw

DSC_3765.jpg
DSC_3767.jpg
DSC_3759.jpg
DSC_3763.jpg
DSC_3772.jpg
DSC_3808.jpg
DSC_3775.jpg
DSC_3776.jpg
DSC_3786.jpg
DSC_3796.jpg
DSC_3799.jpg
DSC_3801.jpg
DSC_3813.jpg
DSC_3816.jpg
DSC_3805.jpg
DSC_3811.jpg
DSC_3802.JPG
DSC_3773.JPG
DSC_3765.jpg
DSC_3767.jpg
DSC_3759.jpg
DSC_3763.jpg
DSC_3772.jpg
DSC_3808.jpg
DSC_3775.jpg
DSC_3776.jpg
DSC_3786.jpg
DSC_3796.jpg
DSC_3799.jpg
DSC_3801.jpg
DSC_3813.jpg
DSC_3816.jpg
DSC_3805.jpg
DSC_3811.jpg
DSC_3802.JPG
DSC_3773.JPG

TRS 275: 11" Manual Circular Cold Saw

2,850.00

$2,850

The Quantum TRS 275 Manual Cold Saw has the capability of moving the head 45 degrees left and 45 degrees right. The reduction unit is in oil bath with a membrane pump for coolant and coolant filter. The TRS 275 is equipped with a double-vice and counter-vice that comes complete with an anti-burr device and bar stop. Service tools come with the machine, as well as the machine's manual and steel pedestal. The TRS 275 is to be equipped with a 275mm blade ($80 Value).

  • Maximum vice opening - 105mm (4.1")
  • This saw can run at 2 different speeds (40-80 R.P.M.)
  • Machine can be brought in, rated at 220 Volt / 3 Phase or 480 Volt / 3 Phase
Add To Cart

TRS 275 Cutting Capacities:

  • Solid Round Cutting at 90 Degrees - 1.75"
  • Solid Round Cutting at 45 Degrees - 1.5"
  • Round Tube Cutting at 90 Degrees - 3.15"
  • Round Tube Cutting at 45 Degrees - 3.15"
  • Square Tube Cutting at 90 Degrees - 3.15"
  • Square Tube Cutting at 45 Degrees - 2.75"
  • Rectangular Tube Cutting at 90 Degrees - 3.9"W x 2.75"H
  • Rectangular Tube Cutting at 45 Degrees - 3.15"W x 2.75"H