C3006: 10 Foot x 1/4" Hydraulic Nargesa Shear with CNC Control

DSC_9446.jpg
DSC_9447.jpg
DSC_9448.jpg
DSC_9449.jpg
DSC_9450.jpg
DSC_9452.jpg
DSC_9454.jpg
DSC_9456.jpg
DSC_9458.jpg
DSC_9460.jpg
DSC_9462.jpg
DSC_9464.jpg
DSC_9469.jpg
DSC_9470.jpg
DSC_9477.jpg
DSC_9446.jpg
DSC_9447.jpg
DSC_9448.jpg
DSC_9449.jpg
DSC_9450.jpg
DSC_9452.jpg
DSC_9454.jpg
DSC_9456.jpg
DSC_9458.jpg
DSC_9460.jpg
DSC_9462.jpg
DSC_9464.jpg
DSC_9469.jpg
DSC_9470.jpg
DSC_9477.jpg

C3006: 10 Foot x 1/4" Hydraulic Nargesa Shear with CNC Control

38,795.00

$38,795 (PRE-ORDER)

Ready to place an order, or do you have any questions? Call us at (909) 476-8007

The latest generation of the NARGESA CNC Vertical Cut Shears are made of stabilized, welded steel that allows our Shears to take on big jobs without deformation.

  • Cutting Length: 10' / 3,030mm
  • Max. Thickness in Steel: 0.25" / 6.35mm
  • Max. Thickness in S.S.: 0.15" / 4mm

THE MAIN ADVANTAGES OF USING A VERTICAL CUT SHEAR INSTEAD OF SWING CUT SHEAR:

  • Energetic saving: Resistance of material in vertical cut is much lower, which becomes a considerable energetic saving.
  • Cutting Quality: Clean, perfect and accurate cut.
  • Life of the Blades: The blades wear is almost nule. The life of the blades is 4 times higher than other shearing systems.
Click Here to Pre-Order
 
 
3+Year+Warranty.png
3+Year+Warranty.png
  • Strokes Per Minute: 12 Strokes. (Full length)   
  • Independent Hydraulic Rammers: 15 units.   
  • Millimeter Squaring Arm Length: 39.3" (1000mm)
  • Two 39.3" (1000mm)-Millimetered Stand Arms.   
  • Fix Cut Inclination: 1.75º   
  • Cutting area lit up by leds.   
  • Driving with Safety Pedal and Emergency Stop.   
  • Back overture with Safety Opto-Electronic Devices.  
  • Motor Power: 9.2kW / 12HP  
  • Hydraulic Pump: 22 Liters   
  • Container Capacity: 96 Liters
  • Cutting Length: 10' (3030mm)
  • Cutting Capacity: 0.230" (6mm) in Steel (450N/mm2) and 0.150" (4mm) in Stainless Steel (700N/mm2)
  • CNC back gauge.
  • Digital Display.   
  • Gauge Displacemnt: 27.5" (700mm)   
  • Accuracy & Repeatability of Positioning from: +/- 0.1mm
  • 4-Edged Lower and Upper Blades: Suitable for Stainless Steel.   
  • Goose neck for cuts with bigger length: 6.8" (173mm)   
  • Thin marking zone for manual cutting.   

Ready to place an order, or do you have any questions?

Call us at (909)476-8007