Spacer

DS60CN PLUS: 50mm Shaft, NC Controlled Tauring Roll Bender

DSC_2941-2.jpg
DSC_2940-2.jpg
DSC_2965-2.jpg
DSC_2961-2.jpg
DSC_2942-2.jpg
DSC_2943.jpg
DSC_2960-2.jpg
DSC_2956-2.jpg
DSC_2953-2.jpg
DSC_2952-2.jpg
DSC_2951-2.jpg
DSC_2950-2.jpg
DSC_2948-2.jpg
DSC_2947-2.jpg
DSC_2946-2.jpg
DSC_2945-2.jpg
DSC_2944-2.jpg
DSC_2941-2.jpg
DSC_2940-2.jpg
DSC_2965-2.jpg
DSC_2961-2.jpg
DSC_2942-2.jpg
DSC_2943.jpg
DSC_2960-2.jpg
DSC_2956-2.jpg
DSC_2953-2.jpg
DSC_2952-2.jpg
DSC_2951-2.jpg
DSC_2950-2.jpg
DSC_2948-2.jpg
DSC_2947-2.jpg
DSC_2946-2.jpg
DSC_2945-2.jpg
DSC_2944-2.jpg

DS60CN PLUS: 50mm Shaft, NC Controlled Tauring Roll Bender

28,600.00

$28,600 (PRE-ORDER)

Ready to place an order, or do you have any questions? Call us at (909) 476-8007

STANDARD FEATURES:

  • 3 Driving Rolls
  • 8 / 16 R.P.M. (2 Speed)
  • 50mm (2") Shaft Diameters
  • High-Quality, Italian Build
  • Equipped with the Tauring CNC-C (Programmable NC Control)
  • LED Display for Digital Readout of Top Roll Position
  • Includes Interchangeable Universal Tooling
  • 4.5" Standard Shaft Working Length
  • Weighs Approximately 1,250 lbs.
  • Machine Dimensions: 26" x 53" x 59"
Click Here to Pre-Order

The SAF DS60CN PLUS model is a pyramid style bender, ideal for a wide variety of bending. All three shafts are gear driven and hardened. They are composed of ground high strength steel, which are supported by sealed roller bearings for anti-friction operation. The frame is made out of rugged cast iron that comes standard with to insure durability. The SAF DS60CN PLUS comes with a self-braking motor and is in conformity with “CE” Regulations (98/37 CE). Electromagnetic compatibility, (89/336) Low tension (73/23, 93/68). This roll bender is equipped with a dual speed motor rated at 8 R.P.M. & 16 R.P.M.


STANDARD CAPACITIES:

  • Round Tube: 3" x .090" with a 56" Minimum Radius
  • Solid Round: 2" with a 36" Minimum Radius
  • Square Tube: 2" x .120" with a 36" Minimum Radius
  • Angle (Leg-Out): 2.25" x .39" with a 28" Minimum Radius
  • Flat Bar (Easy Way): 4" x 1" with a 12" Minimum Radius
  • C-Channel (Easy Way): 2.50" x 1" with a 24" Minimum Radius
  • T-Channel (Easy Way): 3" x .375" with a 18" Minimum Radius
  • Pipe: 2" Sch. 40 Pipe (2.375" O.D.)
  • Rectangular Tube (Easy Way): 3" x 1.50" x .120" with a 36" Minimum Radius
  • Solid Square: 1.5" x 1.5" with a 40" Minimum Radius
  • Angle (Leg-In): 2.25" x .39" with a 28" Minimum Radius
  • Flat Bar (Hard Way): 3" x 0.50" with a 36" Minimum Radius
  • C-Channel (Hard Way): 2.50" x 1" with a 24" Minimum Radius
  • T-Channel (Hard Way): 3" x .375" with a 18" Minimum Radius

 (PLEASE NOTE – The minimum radii shown may require Multi-Pass. PLEASE ALSO NOTE - The sizes shown above are the of the maximum capacity with the minimum radii; when bending smaller profiles, the machine will be able to bend smaller radii.) 


TAURING CNC-C: NC CONTROL

THE CNC-C IS AN NC CONTROL THAT GIVES YOU THE ABILITY TO STORE UP TO 20 PROGRAMS, WITH UP TO 30 STEPS IN EACH PROGRAM.

CNC-C FEATURES:

  • CNC-C storage can contain up to 20 programs, each program composing of up to 30 steps. 
  • The CNC-C machine can also work in the manual cycle.
  • The control has a 16-bit microprocessor.
  • The keyboard is an alphanumerical control.
  • All keys are protected by a Lexan-Membrane suitable in any industrial environment.

The videos below show the power and versatility of the DS60 Series Benders. 


 
 

Ready to place an order, or do you have any questions?

Call us at (909)476-8007