Spacer

DS60HP PLUS: 50mm Shaft, PLC Controlled Tauring Roll Bender

DSC_2917.jpg
DSC_2916.jpg
DSC_2927.jpg
DSC_2925.jpg
DSC_2918.jpg
DSC_2938.jpg
DSC_2934.jpg
DSC_2932.jpg
DSC_2931.jpg
DSC_2929.jpg
DSC_2928.jpg
DSC_2924.jpg
DSC_2923.jpg
DSC_2922.jpg
DSC_2917.jpg
DSC_2916.jpg
DSC_2927.jpg
DSC_2925.jpg
DSC_2918.jpg
DSC_2938.jpg
DSC_2934.jpg
DSC_2932.jpg
DSC_2931.jpg
DSC_2929.jpg
DSC_2928.jpg
DSC_2924.jpg
DSC_2923.jpg
DSC_2922.jpg

DS60HP PLUS: 50mm Shaft, PLC Controlled Tauring Roll Bender

15,500.00

$15,500 (PRE-ORDER)

Ready to place an order, or do you have any questions? Call us at (909) 476-8007

STANDARD FEATURES:

  • 3 Driving Rolls

  • 8 R.P.M. & 16 R.P.M.

  • 50mm (2") Shaft Diameters

  • High-Quality, Italian Build

  • Equipped with the HP PLC Control Panel

  • LED Display for Digital Readout of Top Roll Position

  • Includes Interchangeable Universal Tooling

  • 4.5" Standard Shaft Working Length

  • Weighs Approximately 1,250 lbs.

  • Machine Dimensions: 26" x 53" x 59"

Click Here to Pre-Order

The SAF DS60HP PLUS model is a pyramid style bender, ideal for a wide variety of bending. All three shafts are gear driven and hardened. They are composed of ground high strength steel, which are supported by sealed roller bearings for anti-friction operation. The frame is made out of rugged cast iron that comes standard with to insure durability. The SAF DS60HP PLUS comes with a self-braking motor and is in conformity with “CE” Regulations (98/37 CE). Electromagnetic compatibility, (89/336) Low tension (73/23, 93/68). This roll bender is equipped with a dual speed motor rated at 8 R.P.M. & 16 R.P.M.


STANDARD CAPACITIES:

  • Pipe: 2" Sch. 40 Pipe (2.375" O.D.)
  • Round Tube: 3" x .090" with a 56" Minimum Radius
  • Solid Round: 3" x .090" with a 36" Minimum Radius
  • Square Tube: 2" x .120" with a 36" Minimum Radius
  • Rectangular Tube (Easy Way): 3" x 1.50" x .120" with a 36" Minimum Radius
  • Solid Square: 1.5" x 1.5" with a 40" Minimum Radius
  • Angle (Leg-Out): 2.25" x .39" with a 28" Minimum Radius
  • Angle (Leg-In): 2.25" x .39" with a 28" Minimum Radius
  • Flat Bar (Easy Way): 4" x 1" with a 12" Minimum Radius
  • Flat Bar (Hard Way): 3" x 0.50" with a 36" Minimum Radius
  • C-Channel (Easy Way): 2.50" x 1" with a 24" Minimum Radius
  • C-Channel (Hard Way): 2.50" x 1" with a 24" Minimum Radius
  • T-Channel (Easy Way): 3" x .375" with a 18" Minimum Radius
  • T-Channel (Hard Way): 3" x .375" with a 18" Minimum Radius

    (PLEASE NOTE – The minimum radii shown may require Multi-Pass. PLEASE ALSO NOTE - The sizes shown above are the of the maximum capacity with the minimum radii; when bending smaller profiles, the machine will be able to bend smaller radii.)

TAURING HP PLC CONTROL PANEL

static1.squarespace.jpg

The Tauring HP PLC allows the ability to store 10 "quote-positions" saving the position of the upper roll for quick reference and repeatability.
HP Features:
- Led display.
- Keypad has 15 keys.
- Direct quote positioner allows direct entry on keypad (Self-learning procedure).
- Instrument configuration in mm.
- Easy and quick programming.


 
 

Ready to place an order, or do you have any questions?

Call us at (909)476-8007