DS80HP: 60mm Shaft, PLC Controlled Tauring Roll Bender

DSC_2868.jpg
DSC_2867.jpg
DSC_2856.jpg
DSC_2857.jpg
DSC_2846.jpg
DSC_2847.jpg
DSC_2848.jpg
DSC_2852.jpg
DSC_2853.jpg
DSC_2854.jpg
DSC_2858.jpg
DSC_2859.jpg
DSC_2861.jpg
DSC_2862.jpg
DSC_2863.jpg
DSC_2873.jpg
DSC_2868.jpg
DSC_2867.jpg
DSC_2856.jpg
DSC_2857.jpg
DSC_2846.jpg
DSC_2847.jpg
DSC_2848.jpg
DSC_2852.jpg
DSC_2853.jpg
DSC_2854.jpg
DSC_2858.jpg
DSC_2859.jpg
DSC_2861.jpg
DSC_2862.jpg
DSC_2863.jpg
DSC_2873.jpg

DS80HP: 60mm Shaft, PLC Controlled Tauring Roll Bender

27,800.00

$27,800 (PRE-ORDER)

Ready to place an order, or do you have any questions? Call us at (909)476-8007

STANDARD FEATURES:

  • 3 Driving Rolls
  • 7.7 R.P.M.
  • 60mm (2.36") Shaft Diameters
  • High-Quality, Italian Build
  • Equipped with the HP PLC Control Panel
  • LED Display for Digital Readout of Top Roll Position
  • Includes Interchangeable Universal Tooling
  • 6.3" Standard Shaft Working Length
  • Weighs Approximately 2,250 lbs.
  • Machine Dimensions: 41" x 59" x 67"
Click Here to Pre-Order

The SAF DS80HP model is a pyramid style bender, ideal for a wide variety of bending. All three shafts are gear driven and hardened. They are composed of ground high strength steel, which are supported by sealed roller bearings for anti-friction operation. This machine is very flexible and suitable for a wide variety of products in the field such as tubes, flats, angles, I-beams and special profiles. The machine is composed of a welded steel frame. All important mechanical parts are made out of alloy steel, casehardened, hardened, tempered and rectified. The SAF DS80HP is in conformity with “CE” Regulations (98/37 CE). Electromagnetic compatibility, (89/336) Low tension (73/23,93/68). This roll bender is equipped with a dual speed motor rated at 7.7 R.P.M.


DS80 SERIES - STANDARD CAPACITIES:

(PLEASE NOTE – The minimum radii shown may require Multi-Pass. PLEASE ALSO NOTE - The sizes shown are the of the maximum capacity with the minimum radii; when bending smaller profiles, the machine will be able to bend smaller radii.)

  • Pipe: 3" Sch. 40 Pipe (3.50" O.D.)
  • Round Tube: 4" x .125" with a 40" Minimum Radius
  • Solid Round: 2.50" with a 16" Minimum Radius
  • Square Tube: 3.75" x .150" with a 40" Minimum Radius
  • Rectangular Tube (Easy Way): 5" x 1.5" x .20" with a 40" Minimum Radius
  • Solid Square: 2.25" x 2.25" with a 16" Minimum Radius
  • Angle (Leg-Out): 3.25" x .25" with a 24" Minimum Radius
  • Angle (Leg-In): 3.25" x .25" with a 24" Minimum Radius
  • Flat Bar (Easy Way): 5.5" x 1" with a 16" Minimum Radius
  • Flat Bar (Hard Way): 3.75" x 0.75" with a 28" Minimum Radius
  • C-Channel (Easy Way): 6" x 2" x 0.25" with a 14" Minimum Radius
  • C-Channel (Hard Way): 6" x 2" x 0.25" with a 14" Minimum Radius
  • T-Channel (Easy Way): 4.5" x 2.75" with a .25" Minimum Radius
  • T-Channel (Hard Way): 4.5" x 2.75" x 0.25" with a 18" Minimum Radius

TAURING HP PLC CONTROL PANEL

static1.squarespace.jpg

The Tauring HP PLC allows the ability to store 10 "quote-positions" saving the position of the upper roll for quick reference and repeatability.
HP Features:
- Led display.
- Keypad has 15 keys.
- Direct quote positioner allows direct entry on keypad (Self-learning procedure).
- Instrument configuration in mm.
- Easy and quick programming.


 
 

Ready to place an order, or do you have any questions?

Call us at (909)476-8007