ON SALE FOR $39,000 (from $94,700)

• Up for sale is a used Macri Tube and Pipe Bender

• Capacity: Bend up to 1.75” O.D. Round Tube

• It is equipped with the TigerStop System

• It also has the original mechanical stops and mandrel rods.

This unit was purchased new for bending aluminum extrusions - it is almost brand new

• MODEL: NUMBER EURO 45 CNC 1

• YEAR: 2016

• MACHINE AVAILABLE FOR IMMEDIATE SHIPMENT

• SHIPPING IS AT AN ADDITIONAL COST

CALL OUR TEAM AT (909)476-8007 WITH ANY QUESTIONS.

$3,500

Ready to place an order, or do you have any questions? Call us at (909)476-8007

The basic characteristics of the machine, such as rigidity of the blade support, flywheel dimensioning, band guides, and band stretching, have been thoroughly studied to avoid yielding of the band, increase its durability, and improve linearity and time of cutting. 

S-215-M CUTTING CAPACITIES:

• Round Tube Cutting at 90 Degrees: 5-7/8"
• Round Tube Cutting at 45 Degrees: 4-5/8"
• Square Tube Cutting at 90 Degrees: 5-7/8"
• Square Tube Cutting at 45 Degrees: 4-1/2"
• Rectangular Tube Cutting at 90 Degrees: 4-5/8"H x 7-7/8"W
• Rectangular Tube Cutting at 45 Degrees: 3-1/2"H x 5"W

$5,100

Ready to place an order, or do you have any questions? Call us at (909) 476-8007

The basic characteristics of the machine (such as rigidity of the blade support, flywheel dimensioning, band guides, and band stretching) have been thoroughly studied to avoid yielding of the band, increase its durability, and improve linearity and time of cutting.

• Weight: 600 lbs.
• Overall Dimensions: 69"H x 64"L x 28"W
• Maximum vice opening: 315mm (12.40")
• 2 Speeds Available: 32-66 m/1'
• Band Saw Blade Size: 96.45" x 1.06" x 0.035"
  (2450mm x 27mm x 0.9mm)

Ready to place an order, or do you have any questions?
Call us at (909) 476-8007

220V / 1 PHASE - ON SALE FOR $4,245 (FROM $4,995)

The MACKMA BM Series Non-Mandrel Benders are the ONLY Non-Mandrel Benders that you can utilize to bend in the left-hand and right-hand direction using a reversible die-holder (thanks to the PATENTED Design by MACKMA) on the very same machine. (Ne need to purchase dedicated machines that can only bend in one direction.) The BM34-SP Non-Mandrel Tube and Pipe Bending Machine’s innovative design allows the bending of tubes up to 1.315” (33.4 mm) in diameter with a 0.130” (3.38 mm) wall thickness. With a maximum of 6.7” (170 mm) center line radius it is capable of maximum performance for this size of machine, even in the most demanding markets.

(Shown with optional tooling and table.)

The bend rotation speed [2 to 3 RPM] is monitored by a dedicated inverter, to ensure the correct bending speed according to the diameter and thickness of the tube. The modular design of the bending shaft assembly also allows the use of most competitors tooling, reducing long term tooling costs. The inverter-controlled motor reduces energy consumption to a minimum. The machine is mounted on precision casters for effortless movement around busy workshops and sites Mackma uses only 100% high quality Italian components to ensure long-term reliability.