Quantum - M2050 Roll Plate Bender
This hydraulic double pinch rolling machine is something we take pride in, here at Quantum Machinery, our M2050 is a shining example of that. Being an affordable machine with a high quality performance makes this machine a great asset for anyone. Capable of bending Titanium, Copper, Aluminum, Steel, and much more, this machine consistently conforms materials into high quality outcomes.
Would you like to speak to one of our knowledgeable and friendly Quantum Machinery Sales Experts? Give us a call at (909)476-8007
(Click on titles below to expand)
+ M2050 Capacities & Specifications
- Working Length - 6.725'
- Bending Capacity - 2.0"
- Pre-Bending Capacity - 1.57"
- Top Roll Diameter - 17"
- Bottom Roll Diameter - 16.5"
- Side Roll Diameters - 14.2"
- Power - 40 HP
- Working Height - 6'
- Machine Dimensions - 8.9'W x 16.7'L x 8'H
- Machine Weight - 32,000 lbs.
- Voltage - 230 Volt/3 Phase/60Hz and 480 Volt/3 Phase/60Hz available
+ Controls available for the Quantum M2050
- M0501 - The PQ
ON SALE FOR $39,000 (from $94,700)
Up for sale is a used Macri Tube and Pipe Bender
Capacity: Bend up to 1.75” O.D. Round Tube
It is equipped with the TigerStop System
It also has the original mechanical stops and mandrel rods.
This unit was purchased new for bending aluminum extrusions - it is almost brand new
MODEL: NUMBER EURO 45 CNC 1
MACHINE AVAILABLE FOR IMMEDIATE SHIPMENT
SHIPPING IS AT AN ADDITIONAL COST
CALL OUR TEAM AT (909)476-8007 WITH ANY QUESTIONS.
Ready to place an order, or do you have any questions? Call us at (909)476-8007
The basic characteristics of the machine, such as rigidity of the blade support, flywheel dimensioning, band guides, and band stretching, have been thoroughly studied to avoid yielding of the band, increase its durability, and improve linearity and time of cutting.
S-215-M CUTTING CAPACITIES:
- Round Tube Cutting at 90 Degrees: 5-7/8"
- Round Tube Cutting at 45 Degrees: 4-5/8"
- Square Tube Cutting at 90 Degrees: 5-7/8"
- Square Tube Cutting at 45 Degrees: 4-1/2"
- Rectangular Tube Cutting at 90 Degrees: 4-5/8"H x 7-7/8"W
- Rectangular Tube Cutting at 45 Degrees: 3-1/2"H x 5"W
Ready to place an order, or do you have any questions? Call us at (909) 476-8007
The basic characteristics of the machine (such as rigidity of the blade support, flywheel dimensioning, band guides, and band stretching) have been thoroughly studied to avoid yielding of the band, increase its durability, and improve linearity and time of cutting.
- Weight: 600 lbs.
- Overall Dimensions: 69"H x 64"L x 28"W
- Maximum vice opening: 315mm (12.40")
- 2 Speeds Available: 32-66 m/1'
- Band Saw Blade Size: 96.45" x 1.06" x 0.035"
(2450mm x 27mm x 0.9mm)
Ready to place an order, or do you have any questions?
Call us at (909) 476-8007
220V / 1 PHASE - ON SALE FOR $4,245 (FROM $4,995)
The MACKMA BM Series Non-Mandrel Benders are the ONLY Non-Mandrel Benders that you can utilize to bend in the left-hand and right-hand direction using a reversible die-holder (thanks to the PATENTED Design by MACKMA) on the very same machine. (Ne need to purchase dedicated machines that can only bend in one direction.) The BM34-SP Non-Mandrel Tube and Pipe Bending Machine’s innovative design allows the bending of tubes up to 1.315” (33.4 mm) in diameter with a 0.130” (3.38 mm) wall thickness. With a maximum of 6.7” (170 mm) center line radius it is capable of maximum performance for this size of machine, even in the most demanding markets.
(Shown with optional tooling and table.)
The bend rotation speed [2 to 3 RPM] is monitored by a dedicated inverter, to ensure the correct bending speed according to the diameter and thickness of the tube. The modular design of the bending shaft assembly also allows the use of most competitors tooling, reducing long term tooling costs. The inverter-controlled motor reduces energy consumption to a minimum. The machine is mounted on precision casters for effortless movement around busy workshops and sites Mackma uses only 100% high quality Italian components to ensure long-term reliability.