ON SALE FOR $54,000 (from $94,700)

• Up for sale is a used Macri Tube and Pipe Bender

• Capacity: Bend up to 1.75” O.D. Round Tube

• It is equipped with the TigerStop System

• It also has the original mechanical stops and mandrel rods.

This unit was purchased new for bending aluminum extrusions - it is almost brand new

• MODEL: NUMBER EURO 45 CNC 1

• YEAR: 2016

• MACHINE AVAILABLE FOR IMMEDIATE SHIPMENT

• SHIPPING IS AT AN ADDITIONAL COST

CALL OUR TEAM AT (909)476-8007 WITH ANY QUESTIONS.

$105,000 (FROM $136,000)

Ready to place an order, or do you have any questions? Call us at (909)476-8007

The SLALOM 60 is the only bending machine in the world able to perform 3D (three dimensional) shapes/bends. This machine has been created for the realization of plane shapes required in the field of interior design. With the application of the turn-tube device for the controlled management of the profile plan during the works, the Slalom 60 has extended its application in all those sectors that require the creation of special curves right and / or left with a three-dimensional shapes. The Tauring Slalom 60 CNC-i Bending Machine is equipped with a latest generation numerical control for the complete management of all the machine axis and has an intuitive and easy to use man-machine interface with excellent results in terms of speed, precision and production quality.

$49,900 (PRE-ORDER)

Ready to place an order, or do you have any questions? Call us at (909) 476-8007

The latest generation of the NARGESA CNC Vertical Cut Shears are made of stabilized, welded steel that allows our Shears to take on big jobs without deformation.

• Cutting Length: 10' / 3,030mm

• Max. Thickness in Steel: 0.25" / 6.35mm

• Max. Thickness in S.S.: 0.15" / 4mm

THE MAIN ADVANTAGES OF USING A VERTICAL CUT SHEAR INSTEAD OF SWING CUT SHEAR:

• Energetic saving: Resistance of material in vertical cut is much lower, which becomes a considerable energetic saving.

• Cutting Quality: Clean, perfect and accurate cut.

• Life of the Blades: The blades wear is almost nule. The life of the blades is 4 times higher than other shearing systems.

$3,500

Ready to place an order, or do you have any questions? Call us at (909)476-8007

The basic characteristics of the machine, such as rigidity of the blade support, flywheel dimensioning, band guides, and band stretching, have been thoroughly studied to avoid yielding of the band, increase its durability, and improve linearity and time of cutting. 

S-215-M CUTTING CAPACITIES:

• Round Tube Cutting at 90 Degrees: 5-7/8"
• Round Tube Cutting at 45 Degrees: 4-5/8"
• Square Tube Cutting at 90 Degrees: 5-7/8"
• Square Tube Cutting at 45 Degrees: 4-1/2"
• Rectangular Tube Cutting at 90 Degrees: 4-5/8"H x 7-7/8"W
• Rectangular Tube Cutting at 45 Degrees: 3-1/2"H x 5"W

$5,100

Ready to place an order, or do you have any questions? Call us at (909) 476-8007

The basic characteristics of the machine (such as rigidity of the blade support, flywheel dimensioning, band guides, and band stretching) have been thoroughly studied to avoid yielding of the band, increase its durability, and improve linearity and time of cutting.

• Weight: 600 lbs.
• Overall Dimensions: 69"H x 64"L x 28"W
• Maximum vice opening: 315mm (12.40")
• 2 Speeds Available: 32-66 m/1'
• Band Saw Blade Size: 96.45" x 1.06" x 0.035"
  (2450mm x 27mm x 0.9mm)

$19,700 (PRE-ORDER)

Ready to place an order, or do you have any questions? Call us at (909) 476-8007

Highly efficient Semi-Automatic Band Saw (Belt-Saw Style) machine with excellent cutting accuracy, used to cut midsize and full bars. Its sturdy structure provides the machine with the required stiffness and cutting unit accuracy.

High-capacity band control by two-speed motor and special reducer with bronze gear and tempered worm screw.

• Weight: 1,850 lbs.
• Overall Dimensions: 90"H x 112"L x 68"W
• Maximum vice opening: 560mm (22")
• 2 Speeds Available: 22-73 m/1'
• Band Saw Blade Size: 181.5" x 1.33" x 0.043"
  (4610mm x 34mm x 1.1mm)

Ready to place an order, or do you have any questions?
Call us at (909) 476-8007

220V / 1 PHASE - ON SALE FOR $4,245 (FROM $4,995)

The MACKMA BM Series Non-Mandrel Benders are the ONLY Non-Mandrel Benders that you can utilize to bend in the left-hand and right-hand direction using a reversible die-holder (thanks to the PATENTED Design by MACKMA) on the very same machine. (Ne need to purchase dedicated machines that can only bend in one direction.) The BM34-SP Non-Mandrel Tube and Pipe Bending Machine’s innovative design allows the bending of tubes up to 1.315” (33.4 mm) in diameter with a 0.130” (3.38 mm) wall thickness. With a maximum of 6.7” (170 mm) center line radius it is capable of maximum performance for this size of machine, even in the most demanding markets.

(Shown with optional tooling and table.)

The bend rotation speed [2 to 3 RPM] is monitored by a dedicated inverter, to ensure the correct bending speed according to the diameter and thickness of the tube. The modular design of the bending shaft assembly also allows the use of most competitors tooling, reducing long term tooling costs. The inverter-controlled motor reduces energy consumption to a minimum. The machine is mounted on precision casters for effortless movement around busy workshops and sites Mackma uses only 100% high quality Italian components to ensure long-term reliability.

Ready to place an order, or do you have any questions?
Call us at (909) 476-8007

The MACKMA BM Series Non-Mandrel Benders are the ONLY Non-Mandrel Benders that you can utilize to bend in the left-hand and right-hand direction using a reversible die-holder (thanks to the PATENTED Design by MACKMA) on the very same machine. (Ne need to purchase dedicated machines that can only bend in one direction.) The BM42-A Non-Mandrel Tube and Pipe Bending Machine’s innovative design allows the bending of tubes up to 1.80” (48 mm) in diameter with a 0.060” (1.5 mm) wall thickness. With a maximum of 10.2” (260 mm) center line radius and a 3xO.D. Minimum Radius. It is capable of maximum performance for this size of machine, even in the most demanding markets.

(Shown with optional tooling and optional foot pedal, which is a $550 Additional Option).

The bend rotation speed [2 to 3 RPM] is monitored by a dedicated inverter, to ensure the correct bending speed according to the diameter and thickness of the tube. The modular design of the bending shaft assembly also allows the use of most competitors tooling, reducing long term tooling costs. The inverter-controlled motor reduces energy consumption to a minimum. The machine is mounted on precision casters for effortless movement around busy workshops and sites Mackma uses only 100% high quality Italian components to ensure long-term reliability.

Voltages Available:

• 220V / 1 Phase - On Sale for $5,690 (FROM $6,695)

• 220V / 3 Phase - On Sale for $6,455 (FROM $7,595)

• 480V / 3 Phase - On Sale for $6,455 (FROM $7,595)

Ready to place an order, or do you have any questions?
Call us at (909) 476-8007

The MACKMA BM Series Non-Mandrel Benders are the ONLY Non-Mandrel Benders that you can utilize to bend in the left-hand and right-hand direction using a reversible die-holder (thanks to the PATENTED Design by MACKMA) on the very same machine. (Ne need to purchase dedicated machines that can only bend in one direction.) The BM48-S Non-Mandrel Tube and Pipe Bending Machine’s innovative design allows the bending of tubes up to 1.80” (48 mm) in diameter with a 0.115” (3 mm) wall thickness. With a maximum of 10.2” (260 mm) center line radius and a 3xO.D. Minimum Radius. It is capable of maximum performance for this size of machine, even in the most demanding markets.

(Shown with optional tooling and optional foot pedal, which is a $550 Additional Option).

The bend rotation speed [2 to 3 RPM] is monitored by a dedicated inverter, to ensure the correct bending speed according to the diameter and thickness of the tube. The modular design of the bending shaft assembly also allows the use of most competitors tooling, reducing long term tooling costs. The inverter-controlled motor reduces energy consumption to a minimum. The machine is mounted on precision casters for effortless movement around busy workshops and sites Mackma uses only 100% high quality Italian components to ensure long-term reliability.

VOLTAGES AVAILABLE:

• 220V / 1 PHASE - ON SALE FOR $8,695 (FROM $7,390)

• 220V / 3 PHASE - ON SALE FOR $9,495 (FROM $8,070)

• 480V / 3 PHASE - ON SALE FOR $9,495 (FROM $8,070)

Ready to place an order, or do you have any questions?
Call us at (909) 476-8007

The MACKMA BM Series Non-Mandrel Benders are the ONLY Non-Mandrel Benders that you can utilize to bend in the left-hand and right-hand direction using a reversible die-holder (thanks to the PATENTED Design by MACKMA) on the very same machine. (Ne need to purchase dedicated machines that can only bend in one direction.) The BM60-S Non-Mandrel Tube and Pipe Bending Machine’s innovative design allows the bending of tubes up to 2.30” (60 mm) in diameter with a 0.150” (4 mm) wall thickness. With a maximum of 15” (380 mm) center line radius and a 3xO.D. Minimum Radius. It is capable of maximum performance for this size of machine, even in the most demanding markets.

(Shown with optional tooling and optional foot pedal, which is a $550 Additional Option).

The bend rotation speed [1 to 2 RPM] is monitored by a dedicated inverter, to ensure the correct bending speed according to the diameter and thickness of the tube. The modular design of the bending shaft assembly also allows the use of most competitors tooling, reducing long term tooling costs. The inverter-controlled motor reduces energy consumption to a minimum. The machine is mounted on precision casters for effortless movement around busy workshops and sites Mackma uses only 100% high quality Italian components to ensure long-term reliability.

VOLTAGES AVAILABLE:

• 220V / 1 PHASE - ON SALE FOR $13,295 (FROM $11,300)

• 220V / 3 PHASE - ON SALE FOR $13,975 (FROM $11,880)

• 480V / 3 PHASE - ON SALE FOR $13,975 (FROM $11,880)