Spacer

ALPHA 40 PQI ROLL BENDER

1496864746553.png
1496864746553.png

ALPHA 40 PQI ROLL BENDER

18,500.00

$18,500 (PRE-ORDER)

Ready to place an order, or do you have any questions? Call us at (909)476-8007

THE TAURING ALPHA 40 PQI IS A PYRAMID-STYLE, HYDRAULIC ROLL BENDER WITH RECTILINEAR GUIDED BOTTOM ROLLS, IDEAL FOR BENDING A WIDE VARIETY OF APPLICATIONS.

STANDARD FEATURES:

  • 3 Driving Rolls
  •  7.7 R.P.M.
  • 40mm Shaft Diameters
  • High-Quality, Italian Build
  • Equipped with the Tauring PQI (PLC) Control
  • LED Display for Digital Readout of Top Roll Position
  • Includes Interchangeable Universal Tooling
  • 3.7" Standard Shaft Working Length
  • Weighs Approximately 1,200 lbs.
  • Machine Dimensions: 24" x 37" x 40"
Add To Cart

All three shafts are gear driven and hardened. They are composed of ground high strength steel, which are supported by sealed roller bearings for anti-friction operation. The frame is made out of rugged cast iron that comes standard with to insure durability. The Tauring ALPHA 40 PQI comes with a self-braking motor and is in conformity with “CE” Regulations (98/37 CE). Electromagnetic compatibility, (89/336) Low tension (73/23, 93/68). This roll bender is equipped with a single speed motor rated at 7.7 R.P.M.


ALPHA 40 PQI Roll Bender Standard Capacities:

(PLEASE NOTE – The minimum radii shown may require Multi-Pass. PLEASE ALSO NOTE - The sizes shown are the of the maximum capacity with the minimum radii; when bending smaller profiles, the machine will be able to bend smaller radii.)

  • Round Tube: 2.25" x .075” with a 33" Minimum Radius
  • Solid Round: 1.15" with a 15" Minimum Radius
  • Square Tube: 1.75” x 1.75" x .090" with a 42" Minimum Radius
  • Angle (Leg-Out): 1.75" x 1.75" x .250" with a 24" Minimum Radius
  • Flat Bar (Easy Way): 2.25" x .75” with a 14" Minimum Radius
  • Pipe: 1" Sch. 40 Pipe (1.315" O.D.) with a 16" Minimum Radius
  • Rectangular Tube (Easy Way): 2.25" x 1.1” x .090" with a 45" Minimum Radius
  • Solid Square: 1.1" x 1.1” with a 27" Minimum Radius
  • Angle (Leg-In): 1.75" x 1.75" x .180" with a 29" Minimum Radius
  • Flat Bar (Hard Way): 1.75" x .375” with a 15" Minimum Radius

TAURING PQI PLC CONTROL PANEL

1496864746555.png

The Tauring PQI PLC allows the ability to store 10 "quote-positions", individually saving the positions for each bottom roll; allowing for quick reference and repeatability.

HP Features:
- Led displays (One dedicated LED Display per Bottom Roll).
- Each Keypad has 15 keys.
- Direct quote positioner allows direct entry on keypad (Self-learning procedure).
- Instrument configuration in mm.
- Very easy and quick programming.


The video below showS the power and versatility of the ALPHA 40 Series Benders. 

 
 
 
 

Ready to place an order, or do you have any questions?

Call us at (909)476-8007