DELTA 50 CNC-C ROLL BENDER

DELTA 50 PQI.png
DELTA 50 PQI.png

DELTA 50 CNC-C ROLL BENDER

36,500.00

Ready to place an order, or do you have any questions? Call us at (909)476-8007

THE TAURING DELTA 50 CNC-C IS A PYRAMID-STYLE, HYDRAULIC ROLL BENDER, IDEAL FOR BENDING A WIDE VARIETY OF APPLICATIONS.

STANDARD FEATURES:

  • 3 Driving Rolls

  • 8 R.P.M.

  • 50mm (2") Shaft Diameters

  • High-Quality, Italian Build

  • Equipped with the Tauring CNC-C (Programmable NC Control)

  • LED Display for Digital Readout of Top Roll Position

  • Includes Interchangeable Universal Tooling

  • 4.5" Standard Shaft Working Length

  • Weighs Approximately 1,350 lbs.

  • Machine Dimensions: 41" x 53" x 59"

Click Here to Pre-Order

All three shafts are gear driven and hardened. They are composed of ground high strength steel, which are supported by sealed roller bearings for anti-friction operation. The frame is made out of rugged cast iron that comes standard with to insure durability. The Tauring DELTA50CNcomes with a self-braking motor and is in conformity with “CE” Regulations (98/37 CE). Electromagnetic compatibility, (89/336) Low tension (73/23, 93/68). This roll bender is equipped with a single speed motor rated at 8 R.P.M.

DELTA 50 CNC-C Roll Bender Standard Capacities:

(PLEASE NOTE – The minimum radii shown may require Multi-Pass. PLEASE ALSO NOTE - The sizes shown are the of the maximum capacity with the minimum radii; when bending smaller profiles, the machine will be able to bend smaller radii.)

  • Round Tube: 3" x .090 with a 56" Minimum Radius

  • Solid Round: 2.15" with a 36" Minimum Radius

  • Square Tube: 2.25" x .120" with a 36" Minimum Radius

  • Angle (Leg-Out): 2.25" x .39" with a 28" Minimum Radius

  • Flat Bar (Easy Way): 4" x 1" with a 12" Minimum Radius

  • T-Channel (Easy Way): 3.15" x .375" with a 16" Minimum Radius

  • Pipe: 2" Sch. 40 Pipe (2.375" O.D.)

  • Rectangular Tube (Easy Way): 3" x 1.5" x .120" with a 6" Minimum Radius

  • Solid Square: 1.5" x 1.5" with a 40" Minimum Radius

  • Angle (Leg-In): 2.25" x .39" with a 28" Minimum Radius

  • Flat Bar (Hard Way): 3" x 0.50" with a 36" Minimum Radius

  • T-Channel (Hard Way): 3.15" x .375" with a 16" Minimum Radius


TAURING CNC-C, NC CONTROL

THE CNC-C IS AN NC CONTROL THAT GIVES YOU THE ABILITY TO STORE UP TO 20 PROGRAMS, WITH UP TO 30 STEPS IN EACH PROGRAM. 

CNC-C FEATURES:

  • CNC-C storage can contain up to 20 programs, each program composing of up to 30 steps.

  • The CNC-C machine can also work in the manual cycle.

  • The control has a 16-bit microprocessor.

  • The keyboard is an alphanumerical control.

  • All keys are protected by a Lexan-Membrane suitable in any industrial environment.

 
 

 
 

Ready to place an order, or do you have any questions?

Call us at (909)476-8007