DELTA 60 CNC-C ROLL BENDER

DSC_3673.jpg
DSC_3670.jpg
1a.jpg
DSC_3752.jpg
b3.jpg
b5.jpg
DSC_3679.jpg
DSC_3682.jpg
DSC_3699.jpg
DSC_3710.jpg
DSC_3701.jpg
DSC_3703.jpg
DSC_3673.jpg
DSC_3670.jpg
1a.jpg
DSC_3752.jpg
b3.jpg
b5.jpg
DSC_3679.jpg
DSC_3682.jpg
DSC_3699.jpg
DSC_3710.jpg
DSC_3701.jpg
DSC_3703.jpg

DELTA 60 CNC-C ROLL BENDER

50,900.00

Ready to place an order, or do you have any questions? Call us at (909)476-8007

THE TAURING DELTA 60 CNC-C IS A PYRAMID-STYLE, HYDRAULIC ROLL BENDER, IDEAL FOR BENDING A WIDE VARIETY OF APPLICATIONS.

STANDARD FEATURES:

  • 3 Driving Rolls

  • 7.7 R.P.M.

  • 60mm Shaft Diameters

  • High-Quality, Italian Build

  • Equipped with the Tauring CNC-C (Programmable NC Control)

  • LED Display for Digital Readout of Top Roll Position

  • Includes Interchangeable Universal Tooling

  • 6.3" Standard Shaft Working Length

  • Weighs Approximately 2,300 lbs.

  • Machine Dimensions: 45" x 59" x 67"

Click Here to Pre-Order

Pyramid Style, three gear driven Roll Bender. Lower roll centers can be positioned in four different positions (280mm, 330mm, 380mm or 430mm center distances). All three shafts are hardened, ground high strength steel, which are mounted on taper roller bearings for high radial or axial loads. The top roll is equipped with a friction mechanical device for rim speed compensation. The frame is made out of rugged steel. The Delta 60 comes with a self-braking motor and is in conformity with “CE” Regulations (89/392 CE). Electromagnetic compatibility, (89/336) Low tension (73/23,93/68).

DELTA 60 CNC-C ROLL BENDER Standard Capacities:

(PLEASE NOTE – The minimum radii shown may require Multi-Pass. PLEASE ALSO NOTE - The sizes shown are the of the maximum capacity with the minimum radii; when bending smaller profiles, the machine will be able to bend smaller radii.)

  • Round Tube: 3.5" x .10” with a 45" Minimum Radius

  • Solid Round: 2.5” with a 21" Minimum Radius

  • Square Tube: 3.15” x 3.15" x .140" with a 45" Minimum Radius

  • Angle (Leg-Out): 3.15" x 3.15" x .315" with a 29" Minimum Radius

  • Flat Bar (Easy Way): 5.25" x 1.4” with a 25" Minimum Radius

  • T-Channel (Easy Way): 2.8" x 2.8” x .35" with a 21" Minimum Radius

  • Pipe: 2.50" Sch. 40 Pipe (2.875" O.D.) with a 27" Minimum Radius

  • Rectangular Tube (Easy Way): 4.25" x 2.125” x .14" with a 45" Minimum Radius

  • Solid Square: 2.125" x 2.125” with a 21" Minimum Radius

  • Angle (Leg-In): 3.15" x 3.15" x .315" with a 37" Minimum Radius

  • Flat Bar (Hard Way): 3.5" x .70” with a 37" Minimum Radius

  • T-Channel (Hard Way): 2.8" x 2.8” x .35" with a 21" Minimum Radius


TAURING CNC-C, NC CONTROL

 

THE CNC-C IS AN NC CONTROL THAT GIVES YOU THE ABILITY TO STORE UP TO 20 PROGRAMS, WITH UP TO 30 STEPS IN EACH PROGRAM. 

CNC-C FEATURES:

  • CNC-C storage can contain up to 20 programs, each program composing of up to 30 steps.

  • The CNC-C machine can also work in the manual cycle.

  • The control has a 16-bit microprocessor.

  • The keyboard is an alphanumerical control.

  • All keys are protected by a Lexan-Membrane suitable in any industrial environment.

THE VIDEOS BELOW SHOWS THE POWER AND VERSATILITY OF THE DELTA 60 SERIES BENDERS

 
 

 
 

Ready to place an order, or do you have any questions?

Call us at (909)476-8007