DELTA 60 PQI ROLL BENDER

1496789466281.png
1496789466281.png

DELTA 60 PQI ROLL BENDER

39,000.00

Ready to place an order, or do you have any questions? Call us at (909)476-8007

THE TAURING DELTA 60 PQI IS A PYRAMID-STYLE, HYDRAULIC ROLL BENDER, IDEAL FOR BENDING A WIDE VARIETY OF APPLICATIONS.

STANDARD FEATURES:

  • 3 Driving Rolls

  • 7.7 R.P.M.

  • 60mm Shaft Diameters

  • High-Quality, Italian Build

  • Equipped with the Tauring HP PLC Control

  • LED Display for Digital Readout of Top Roll Position

  • Includes Interchangeable Universal Tooling

  • 6.3" Standard Shaft Working Length

  • Weighs Approximately 2,300 lbs.

  • Machine Dimensions: 45" x 59" x 67"

Click Here to Pre-Order

All three shafts are gear driven and hardened. They are composed of ground high strength steel, which are supported by sealed roller bearings for anti-friction operation. The frame is made out of rugged cast iron that comes standard with to insure durability. The Tauring DELTA 60 PQI comes with a self-braking motor and is in conformity with “CE” Regulations (98/37 CE). Electromagnetic compatibility, (89/336) Low tension (73/23, 93/68). This roll bender is equipped with a single speed motor rated at 7.7 R.P.M.


THE VIDEOS BELOW SHOW THE POWER AND VERSATILITY OF THE DELTA 60 SERIES BENDERS. 

 
 

DELTA 60 PQI ROLL BENDER Standard Capacities:

(PLEASE NOTE – The minimum radii shown may require Multi-Pass. PLEASE ALSO NOTE - The sizes shown are the of the maximum capacity with the minimum radii; when bending smaller profiles, the machine will be able to bend smaller radii.)

  • Round Tube: 3.5" x .10” with a 45" Minimum Radius

  • Solid Round: 2.5” with a 21" Minimum Radius

  • Square Tube: 3.15” x 3.15" x .140" with a 45" Minimum Radius

  • Angle (Leg-Out): 3.15" x 3.15" x .315" with a 29" Minimum Radius

  • Flat Bar (Easy Way): 5.25" x 1.4” with a 25" Minimum Radius

  • T-Channel (Easy Way): 2.8" x 2.8” x .35" with a 21" Minimum Radius

  • Pipe: 2.50" Sch. 40 Pipe (2.875" O.D.) with a 27" Minimum Radius

  • Rectangular Tube (Easy Way): 4.25" x 2.125” x .14" with a 45" Minimum Radius

  • Solid Square: 2.125" x 2.125” with a 21" Minimum Radius

  • Angle (Leg-In): 3.15" x 3.15" x .315" with a 37" Minimum Radius

  • Flat Bar (Hard Way): 3.5" x .70” with a 37" Minimum Radius

  • T-Channel (Hard Way): 2.8" x 2.8” x .35" with a 21" Minimum Radius


TAURING HP PLC CONTROL PANEL

static1.squarespace.jpg

The Tauring HP PLC allows the ability to store 10 "quote-positions" saving the position of the upper roll for quick reference and repeatability.
HP Features:
- Led display.
- Keypad has 15 keys.
- Direct quote positioner allows direct entry on keypad (Self-learning procedure).
- Instrument configuration in mm.
- Easy and quick programming.


 
 

Ready to place an order, or do you have any questions?

Call us at (909)476-8007