Spacer

DS60CN PLUS: NC Controlled 50mm Shaft Tauring (Hydraulic) Roll Bender

DS60CN PLUS.png
DS60CN PLUS.png

DS60CN PLUS: NC Controlled 50mm Shaft Tauring (Hydraulic) Roll Bender

28,600.00

$28,600

Ready to place an order, or do you have any questions? Call us at (909)476-8007

  • 3 Driving Rolls
  • 8 / 16 R.P.M. (2 Speed)
  • 50mm (2") Shaft Diameters
  • High-Quality, Italian Build
  • Equipped with the Tauring CNC-C (Programmable NC Control)
  • LED Display for Digital Readout of Top Roll Position
  • Includes Interchangeable Universal Tooling
  • 4.5" Standard Shaft Working Length
  • Weighs Approximately 1,250 lbs.
  • Machine Dimensions: 26" x 53" x 59"
Add To Cart

The Tauring DS60CN PLUS is a Pyramid-Style, Hydraulic Roll Bender; ideal for bending an extremely wide variety of applications. All three shafts are gear driven and hardened. They are composed of ground high strength steel, which are supported by sealed roller bearings for anti-friction operation.

 

THE VIDEOS BELOW SHOW THE POWER AND VERSATILITY OF THE DS60 SERIES BENDERS. 

 

The frame is made out of rugged cast iron that comes standard with to insure durability. The Tauring DS60CN PLUS comes with a self-braking motor and is in conformity with “CE” Regulations (98/37 CE). Electromagnetic compatibility, (89/336) Low tension (73/23, 93/68). This roll bender is equipped with a dual speed motor rated at 8 and 16 R.P.M.


TAURING CNC-C, NC CONTROL

THE CNC-C IS AN NC CONTROL THAT GIVES YOU THE ABILITY TO STORE UP TO 20 PROGRAMS, WITH UP TO 30 STEPS IN EACH PROGRAM. 

CNC-C FEATURES:

  • CNC-C storage can contain up to 20 programs, each program composing of up to 30 steps. 
  • The CNC-C machine can also work in the manual cycle.
  • The control has a 16-bit microprocessor.
  • The keyboard is an alphanumerical control.
  • All keys are protected by a Lexan-Membrane suitable in any industrial environment.

DS60CN PLUS Roll Bender Standard Capacities:

(PLEASE NOTE – The minimum radii shown may require Multi-Pass. PLEASE ALSO NOTE - The sizes shown are the of the maximum capacity with the minimum radii; when bending smaller profiles, the machine will be able to bend smaller radii.)

  • Round Tube: 3" x .090" with a 56" Minimum Radius
  • Pipe: 2" Sch. 40 Pipe (2.375" O.D.)
  • Solid Round: 2" with a 36" Minimum Radius
  • Square Tube: 2" x .120" with a 36" Minimum Radius
  • Solid Square: 1.5" x 1.5" with a 40" Minimum Radius
  • Rectangular Tube (Easy Way): 3" x 1.50" x .120" with a 36" Minimum Radius
  • Angle (Leg-Out): 2.25" x .39" with a 28" Minimum Radius
  • Angle (Leg-In): 2.25" x .39" with a 28" Minimum Radius
  • Flat Bar (Easy Way): 4" x 1" with a 12" Minimum Radius
  • Flat Bar (Hard Way): 3" x 0.50" with a 36" Minimum Radius
  • T-Channel (Easy Way): 3" x .375" with a 18" Minimum Radius
  • T-Channel (Hard Way): 3" x .375" with a 18" Minimum Radius

 
 

Ready to place an order, or do you have any questions?

Call us at (909)476-8007