Spacer

DS60HP PLUS ROLL BENDER

DSC_2916.jpg
DSC_2917.jpg
DSC_2925.jpg
DSC_2927.jpg
DSC_2918.jpg
DSC_2922.jpg
DSC_2923.jpg
DSC_2924.jpg
DSC_2928.jpg
DSC_2929.jpg
DSC_2931.jpg
DSC_2932.jpg
DSC_2934.jpg
DSC_2938.jpg
DSC_2916.jpg
DSC_2917.jpg
DSC_2925.jpg
DSC_2927.jpg
DSC_2918.jpg
DSC_2922.jpg
DSC_2923.jpg
DSC_2924.jpg
DSC_2928.jpg
DSC_2929.jpg
DSC_2931.jpg
DSC_2932.jpg
DSC_2934.jpg
DSC_2938.jpg

DS60HP PLUS ROLL BENDER

15,500.00

$15,500

Ready to place an order, or do you have any questions? Call us at (909)476-8007

  • 3 Driving Rolls
  • 8 / 16 R.P.M. (2 Speed)
  • 50mm (2") Shaft Diameters
  • High-Quality, Italian Build
  • Equipped with the Tauring HP PLC Control
  • LED Display for Digital Readout of Top Roll Position
  • Includes Interchangeable Universal Tooling
  • 4.5" Standard Shaft Working Length
  • Weighs Approximately 1,250 lbs.
  • Machine Dimensions: 26" x 53" x 59"
Add To Cart

The Tauring DS60HP PLUS is a Pyramid-Style, Hydraulic Roll Bender; ideal for bending an extremely wide variety of applications. All three shafts are gear driven and hardened. They are composed of ground high strength steel, which are supported by sealed roller bearings for anti-friction operation.

 

THE VIDEOS BELOW SHOW THE POWER AND VERSATILITY OF THE DS60 SERIES BENDERS. 

 

The frame is made out of rugged cast iron that comes standard with to insure durability. The Tauring DS60HP PLUS comes with a self-braking motor and is in conformity with “CE” Regulations (98/37 CE). Electromagnetic compatibility, (89/336) Low tension (73/23, 93/68). This roll bender is equipped with a dual speed motor rated at 8 and 16 R.P.M.


DS60HP PLUS Roll Bender Standard Capacities:

(PLEASE NOTE – The minimum radii shown may require Multi-Pass. PLEASE ALSO NOTE - The sizes shown are the of the maximum capacity with the minimum radii; when bending smaller profiles, the machine will be able to bend smaller radii.)

  • Round Tube: 3" x .090" with a 56" Minimum Radius
  • Pipe: 2" Sch. 40 Pipe (2.375" O.D.)
  • Solid Round: 2" with a 36" Minimum Radius
  • Square Tube: 2" x .120" with a 36" Minimum Radius
  • Solid Square: 1.5" x 1.5" with a 40" Minimum Radius
  • Rectangular Tube (Easy Way): 3" x 1.50" x .120" with a 36" Minimum Radius
  • Angle (Leg-Out): 2.25" x .39" with a 28" Minimum Radius
  • Angle (Leg-In): 2.25" x .39" with a 28" Minimum Radius
  • Flat Bar (Easy Way): 4" x 1" with a 12" Minimum Radius
  • Flat Bar (Hard Way): 3" x 0.50" with a 36" Minimum Radius
  • T-Channel (Easy Way): 3" x .375" with a 18" Minimum Radius
  • T-Channel (Hard Way): 3" x .375" with a 18" Minimum Radius

TAURING HP PLC CONTROL PANEL

static1.squarespace.jpg

The Tauring HP PLC allows the ability to store 10 "quote-positions" saving the position of the upper roll for quick reference and repeatability.
HP Features:
- Led display.
- Keypad has 15 keys.
- Direct quote positioner allows direct entry on keypad (Self-learning procedure).
- Instrument configuration in mm.
- Easy and quick programming.


 
 

Ready to place an order, or do you have any questions?

Call us at (909)476-8007