SAF - DS100 Roll Bender

bending-machine-with-3-driven-roll-with-cnc

The versatility and efficiency of the DS100 makes it capable of producing the great quality without the economical sacrifice. The DS100 is the reference model for those wanting to expand business without great investments. 

Would you like to speak to one of our knowledgeable and friendly Quantum Machinery Sales Experts? Give us a call at (909)476-8007


(Click on titles below to expand)

+ DS100 Models

  • DS100HP - The DS100HP can be used in the vertical or horizontal position by means of hook, strap, and forklift operation. Where the DS100HP differentiates itself is with it's PLC. The DS100HP is equipped with a HP PLC that allows you to store up to 10 positions, digitally, of your top roll.
  • DS100CN - The DS100CN is a very verstaile unit; the DS100CN is equipped with a NC control that allows you to store up to 20 programs, with the capability of storing up to 30 steps per program. You also have the ability of using this machine in either the vertical or horizontal position and has a digital display.

+ DS100 Capacities

  • Round Tube - Size: 5.25" x .125" / Min. Radius: 95" (3/4)
  • Square Tube - Size: 4" x 4" x .250" / Min. Radius: 71" (3/5)
  • Flat Bar (Easy Way) - Size: 6.3" x 1.5" / Min. Radius: 14" (3/6/7)
  • Flat Bar (Hard Way) - Size: 4.25" x 1" / Min. Radius: 36" (3/6/7)
  • Angle (Leg Out) - Size: 3.9" x 3.9" x 0.40" / Min. Radius: 60" (3/6/7)
  • Solid Round - Size: 2.75" / Min. Radius: 30" (3/4)

(1) = Right lateral correcting tool for leg in angles. Prevents material from twisting.

(2) = Left lateral correcting tool for leg in angles. Prevents material from twisting.

(3) = Shaft tension brace rods. Prevents shafts from deflecting.

(4) = Special round tooling.

(5) = Rolls for aluminum and iron tubes with thin wall thickness.

(6) = Standard universal tools supplied can also be used.

(7) = Rolls for special profiles.

(8) = Work to be done with Special Long Shafts.

PLEASE NOTE – MINIMUM RADII SHOWN MAY REQUIRE MULTI- PASS

+ DS100 Specifications

  • Driven Rolls - 3
  • Hydraulic Roll Adjustment
  • Shaft Diameter - 80mm
  • Standard Shaft Working Length - 8.5"
  • Universal Tool Set - 1 Set
  • Motor - 12.75
  • Shaft Revolutions Per Minute - 7.1 R.P.M.
  • Machine Dimensions - 41"W x 61"L x 74"H
  • Machine Weight - 4,200 lbs.
  • Voltage - 230 Volt/3 Phase/60Hz and 480 Volt/3 Phase/60Hz available

(Video below is of a DS60HV PLUS)