SAF - DS120 Roll Bender

3-driven-rolls-cnc-rolling-machine

Good quality at a reasonable cost, ease of use, sturdy mechanical parts are just some of the recognized strong points of this versatile bending machine. Variety of tools and use of independent supports make it highly performing at the top of its category.

Would you like to speak to one of our knowledgeable and friendly Quantum Machinery Sales Experts? Give us a call at (909)476-8007


(Click on titles below to expand)

+ DS120 Models

  • DS120HP - The DS120HP can be used in the vertical or horizontal position by means of hook, strap, and forklift operation. Where the DS120HP differentiates itself is with it's PLC. The DS120HP is equipped with a HP PLC that allows you to store up to 10 positions, digitally, of your top roll.
  • DS120CN - The DS120CN is a very verstaile unit; the DS120CN is equipped with a NC control that allows you to store up to 20 programs, with the capability of storing up to 30 steps per program. You also have the ability of using this machine in either the vertical or horizontal position and has a digital display.

+ DS120 Capacities

  • Round Tube - Size: 5.5” x .120” / Min. Radius 100” (3/4)
  • Square Tube - Size: 4.25” x 4.25” x .12” / Min. Radius 80” (3/5/6/7)
  • Flat Bar (Easy Way) - Size: 7.75” x 1.75” / Min. Radius 32” (3/6)
  • Flat Bar (Hard Way) - Size: 4.5” x 1.25” / Min. Radius 30” (3/6)
  • Angle (Leg Out) - Size: 4.25” x 4.25” x .50” Min. Radius 100” (7)
  • Solid Round - Size: 3.25” Min. Radius 24” (7)

(1) = Right lateral correcting tool for leg in angles. Prevents material from twisting.

(2) = Left lateral correcting tool for leg in angles. Prevents material from twisting.

(3) = Shaft tension brace rods. Prevents shafts from deflecting.

(4) = Special round tooling.

(5) = Rolls for aluminum and iron tubes with thin wall thickness.

(6) = Standard universal tools supplied can also be used.

(7) = Rolls for special profiles.

(8) = Work to be done with Special Long Shafts.

PLEASE NOTE – MINIMUM RADII SHOWN MAY REQUIRE MULTI- PASS

+ DS120 Specifications

  • Driven Rolls - 3
  • Hydraulic Roll Adjustment
  • Shaft Diameter - 100mm
  • Standard Shaft Working Length - 200mm
  • Universal Tool Set - 1 Set
  • Motor - 14.75 HP
  • Shaft Revolutions Per Minute - 5.5 R.P.M.
  • Machine Dimensions - 5.6'x 7'x 5'.9'
  • Machine Weight - 5,700 lbs.
  • Voltage - 230 Volt/3 Phase/60Hz and 480 Volt/3 Phase/60Hz available

(Video below is of a DS60HV PLUS)