SAF - DS50 Roll Bender
Quantum Machinery's DS50 has satisfied many customers. Capable of bending up to 2" round tube, this machine is perfect for any job within its capacity. We have the DS50M and the DS50HV. These two options can both be very beneficial depending on the project you are performing.
Would you like to speak to one of our knowledgeable and friendly Quantum Machinery Sales Experts? Give us a call at (909)476-8007
(Click on titles below to expand)
+ DS50 Models
- DS50M - Mechanical Top Roll with counter to display the top roll position, Hydraulic 3 Roll Driven Roll Bender that can be used in either the vertical, or the horizontal position.
- DS50HV - Hydraulic Top Roll, 3 Roll Driven Roll Bender that can be used in the vertical or horizontal position and has an LED display to show the position of the top roll.
+ DS50 Capacities
- Round Tube - Size: 2" x .080" / Min. Radius: 20" (SRT)
- Square Tube - Size: 1.75" x 1.75" x .090" / Min. Radius: 30" (RSP/TRS)
- Flat Bar (Easy Way) - Size: 2" x 1" / Min. Radius: 8" (TRS)
- Flat Bar (Hard Way) - Size: 2" x 0.50" / Min. Radius: 24" (TRS)
- Angle (Leg Out) - Size: 1.75" x 1.75" x 0.25" / Min. Radius: 16" (TRS/TT)
- Solid Round - Size: 1.25" / Min. Radius: 14" (TT)
TRS = Set of standard rolls
SRT = Special Tooling for Round Tube and/or Pipe
RSP = Rolls for special profiles
TT = Set of grooved rolls for tube and pipe
*PLEASE NOTE – MINIMUM RADII SHOWN MAY REQUIRE MULTI- PASS*
+ DS50 Specifications
- Driven Rolls - 3
- Mechanical(M) or Hydraulic(HV) Roll Adjustment (Your choice)
- Shaft Diameter - 50mm
- Standard Shaft Working Length - 3.75"
- Universal Tool Set - 1 Set
- Motor - 2kW
- Shaft Revolutions Per Minute - 9-18 (2 Speed)
- Machine Dimensions - 30"x47"x53"h
- Machine Weight - 890 lbs.