Spacer

SAF - DS60 Roll Bender

roller-with-cnc-control-bending-machine

The DS60 is one of our best sellers! frequently purchased from us at a very affordable price for the quality of fine machinery you are receiving. There are 4 models to choose from, excellent selection for any type of project you need done.

Would you like to speak to one of our knowledgeable and friendly Quantum Machinery Sales Experts? Give us a call at (909)476-8007


(Click on titles below to expand)

+ DS60 Models

  • DS60 BASIC PLUS - The DS60 BASIC PLUS was born because of our customers; Tauring has given us a solution to those who have a tighter budget than others, but still need a heavy duty machine to get the job done. By combining many key factors that create a great product - Extremelely Competitively Priced 3 Drive Roll Bender, the High Italian Quality that you have come to know and love, and the sturdiness, as you would expect, of a durable machine that will last you years and years; the DS60 BASIC PLUS is the obvious choice for a competitively priced 50mm shaft unit. The DS60 BASIC is a single speed Roll Bender with a LED display mounted onto the front face of the machine which displays the position of the top roll. The machine can be used in either the vertical or horizontal position.
  • DS60HV PLUS - The DS60HV PLUS has been a customer favorite for years!! With the capability of using the machine in either the vertical or horizontal position, the ability to run the machine in TWO different speeds, not to mention the power that this machine contains, and having your LED display mounted right onto your control has helped the DS60HV PLUS prove itself to be a superior leader in the area of 50mm shaft Roll Bending Machines, also being very competitively priced.
  • DS60HP PLUS - The DS60HP PLUS is very similar to it's predecessor, the DS60HV PLUS, in the way that it can also be used in the vertical or horizontal position by means of hook, strap, and forklift operation, and has TWO speeeds. Where the DS60HP PLUS differentiates itself is with it's PLC. The DS60HP PLUS is equipped with a HP PLC that allows you to store up to 10 positions, digitally, of your top roll.
  • DS60CN PLUS - The DS60CN PLUS is truly the most verstaile of all the units in the DS60 models. The DS60CN PLUS comes equipped with a NC control that allows you to store up to 20 programs, with the capability of storing up to 30 steps per program. You also have the ability of using this machine in either the vertical or horizontal position and has a LED display, so that you may see the position of the top roll, as the machine sees it.

+ DS60 Capacities

  • Round Tube - Size: 3" x .120" / Min. Radius: 32" (SRT/IS)
  • Square Tube - Size: 2.25" x 2.25" x .120" / Min. Radius: 36" (RSP/TRS/IS)
  • Flat Bar (Easy Way) - Size: 4" x 1" / Min. Radius: 12" (TRS/IS)
  • Flat Bar (Hard Way) - Size: 3" x 0.50" / Min. Radius: 36" (TRS/IS)
  • Angle (Leg Out) - Size: 2.25" x 2.25" x 0.39" / Min. Radius: 28" (TRS/TT/IS)
  • Solid Round - Size: 2" / Min. Radius: 20" (TT)

TRS = Set of standard rolls
SRT = Special Tooling for Round Tube and/or Pipe
RSP = Rolls for special profiles
TT = Set of grooved rolls for tube and pipe
IS = Independent Supports

*PLEASE NOTE – MINIMUM RADII SHOWN MAY REQUIRE MULTI- PASS*

 

+ DS60 Specifications

  • Driven Rolls - 3
  • Hydraulic Roll Adjustment
  • Shaft Diameter - 50mm
  • Standard Shaft Working Length - 4.50"
  • Universal Tool Set - 1 Set
  • Motor - 5.5 HP
  • Shaft Revolutions Per Minute - 8-16 (2 Speed)
  • Machine Dimensions - 27"x53"x59"h
  • Machine Weight - 1,250 lbs.
  • Voltage - 230 Volt/3 Phase/60Hz and 480 Volt/3 Phase/60Hz available