Spacer
left-right-bending-machine

Technical Data:
Driving rolls: 6
Shaft speed: 6 - 42
Weight (Kg): 640+320 (GA)
Total power (Kw): 2,6+0,35 (GA)
Working height: 107
Size (Cm): 150x85x112

 

 

Tauring - Slalom 20

HYDRAULIC ROLL BENDER (3 DRIVEN ROLLS)

Bending machine with 6 driving rolls, characterized by double bending direction for bends and counterbends on the same plane. TECHNICAL DATA - Driving rolls: 6 - Shaft speed: 6-42 - Weight (Kg): 640+320 (GA) - Total power (Kw): 2,6+0,35 (GA) - Working height: 107 - Size (Cm): 150x85x112


bending-machine-with-6-rolls

Tauring - Slalom 50

HYDRAULIC ROLL BENDER (3 DRIVEN ROLLS)

The SLALOM 50 is completely different from the normal bending machine with three rollers , even if the curvature takes place on the same principle .
Like all models SLALOM , it allows to bend pipes and profiles in both directions of curvature , producing geometric shapes sinuous and undulating both regular and irregular .
The machine consists of 4 driving rolls and 2 bending rolls . The latter moving to the right and left create the right interference with the axis of the tube to cause the curvature in one direction or the other .


roll-bender-6-driven-rolls-2-bending-rolls

Technical Data:
Driving rolls: 6
Shaft speed: 6 - 42
Weight (Kg): 640+320 (GA)
Total power (Kw): 2,6+0,35 (GA)
Working height: 107
Size (Cm): 150x85x112

Tauring - Slalom 60

HYDRAULIC ROLL BENDER (3 DRIVEN ROLLS)

The SLALOM 60 is equipped with 6 driving rolls and 2 bending ones that, moving towards right and towards left, create the right interference with the tube axis to obtain the bending in both directions. TECHNICAL DATA - Driving rolls: 6 - Shaft speed: 4-25 - Weight (Kg): 1250+320 (GA) - Total power (Kw): 7+0,75 (GA) - Working height: 107 - Size (Cm): 185x95x125