S 335 CSO: Manual Band Saw with Automatic Head Descent and Variable Speed Inverter
Ready to place an order, or do you have any questions?
Call us at (704) 703-9400
The essential basic characteristics of our Quantum S-335-CSO Band Saw (such as the rigidity of the blade support, the flywheel dimensioning, band saw blade guides, and band stretching) have been extensively studied thoroughly in order to avoid yielding of the band - ultimately increasing the S-335-CSO’s durability above all other band saws of this size in the marketplace, and assists to improve the linearity of the cuts, as well as the cutting time.
Sawing machine with bow falling controlled by a hydraulic circuit upon cutting, bar feeding and vice closure manually operated, manual head return
Vertical rotation on bolt with adjustable tapered bearings without backlash
High-capacity band control by two-speed motor and special reducer with bronze gear tempered and ground worm screw
Appropriately dimensioned flywheels
Strong band guides with tight stress-raiser bearings and adjustable widia tips
Band stretching is obtained by electro-mechanical blade tensioner with microswitch
Vice with a device for quick approach
Wide rotating material support table
Accident-preventing devices on the flywheel casing, on the control handle, and on the blade
Hydraulic cylinder for controlled descent
Removable chip collection tray
Cutting thickness 1,2 mm
Cutting range 45° left 60° right
Adjustable stop for cuts of the same size
24 V low tension plant
0,06 kW power-driver pump for band cooling
ACCESSORIES ON REQUEST
SINGLE -PHASE motor 75 m/1’
Pneumatic installation for vice
Speed variator from 20 to 90 m/1’
Ready to place an order, or do you have any questions?
Call us at (704) 703-9400
The essential basic characteristics of our Quantum S-335-CSO Band Saw (such as the rigidity of the blade support, the flywheel dimensioning, band saw blade guides, and band stretching) have been extensively studied thoroughly in order to avoid yielding of the band - ultimately increasing the S-335-CSO’s durability above all other band saws of this size in the marketplace, and assists to improve the linearity of the cuts, as well as the cutting time.
Sawing machine with bow falling controlled by a hydraulic circuit upon cutting, bar feeding and vice closure manually operated, manual head return
Vertical rotation on bolt with adjustable tapered bearings without backlash
High-capacity band control by two-speed motor and special reducer with bronze gear tempered and ground worm screw
Appropriately dimensioned flywheels
Strong band guides with tight stress-raiser bearings and adjustable widia tips
Band stretching is obtained by electro-mechanical blade tensioner with microswitch
Vice with a device for quick approach
Wide rotating material support table
Accident-preventing devices on the flywheel casing, on the control handle, and on the blade
Hydraulic cylinder for controlled descent
Removable chip collection tray
Cutting thickness 1,2 mm
Cutting range 45° left 60° right
Adjustable stop for cuts of the same size
24 V low tension plant
0,06 kW power-driver pump for band cooling
ACCESSORIES ON REQUEST
SINGLE -PHASE motor 75 m/1’
Pneumatic installation for vice
Speed variator from 20 to 90 m/1’
Ready to place an order, or do you have any questions?
Call us at (704) 703-9400
The essential basic characteristics of our Quantum S-335-CSO Band Saw (such as the rigidity of the blade support, the flywheel dimensioning, band saw blade guides, and band stretching) have been extensively studied thoroughly in order to avoid yielding of the band - ultimately increasing the S-335-CSO’s durability above all other band saws of this size in the marketplace, and assists to improve the linearity of the cuts, as well as the cutting time.
Sawing machine with bow falling controlled by a hydraulic circuit upon cutting, bar feeding and vice closure manually operated, manual head return
Vertical rotation on bolt with adjustable tapered bearings without backlash
High-capacity band control by two-speed motor and special reducer with bronze gear tempered and ground worm screw
Appropriately dimensioned flywheels
Strong band guides with tight stress-raiser bearings and adjustable widia tips
Band stretching is obtained by electro-mechanical blade tensioner with microswitch
Vice with a device for quick approach
Wide rotating material support table
Accident-preventing devices on the flywheel casing, on the control handle, and on the blade
Hydraulic cylinder for controlled descent
Removable chip collection tray
Cutting thickness 1,2 mm
Cutting range 45° left 60° right
Adjustable stop for cuts of the same size
24 V low tension plant
0,06 kW power-driver pump for band cooling
ACCESSORIES ON REQUEST
SINGLE -PHASE motor 75 m/1’
Pneumatic installation for vice
Speed variator from 20 to 90 m/1’
QUANTUM MACC S-335-CSO BAND SAW CUTTING CAPACITIES AND SPECIFICATIONS:
Band Saw machine with Automatic Bow/Head-Descent, controlled by a hydraulic circuit upon cutting. The “Bar-Feeding”, Vice Closure and Head Return are manually operated.
Sawing machine with bow falling controlled by a hydraulic circuit upon cutting, bar feeding and vice closure manually operated, manual head return.
Vertical rotation on bolt with adjustable tapered bearings without backlash.
High-capacity band control by two-speed motor and special reducer with bronze gear tempered and ground worm screw.
Appropriately dimensioned flywheels.
Strong band guides with tight stress-raiser bearings and adjustable widia tips
Band stretching is obtained by electro-mechanical blade tensioner with microswitch.
Vice with a device for quick approach.
Wide rotating material support table.
Accident-preventing devices on the flywheel casing, on the control handle, and on the blade.
Hydraulic cylinder for controlled descent.
Removable chip collection tray.
Cutting range 45° left 60° right.
Adjustable stop for cuts of the same size.
24 V low tension plant.
0.06 kW power-driver pump for band cooling.
Cutting Thickness: .047" (1.2 mm)
Cutting Range: 45° left to 60° Right.
Blade Size: 3,010 x 27 x 0.9 mm
Maximum Vice Opening: 13" (330 mm)
Machine Weight: 915 lbs. (415 kg.)
Motor Power: 0.75 - 1.1 kW
This Saw Includes: Bar Stop, Bar Support Arm, Instruction Manual, Service Tools & 1 Band Saw Blade.
Alternate Electrical: 480V / 3 PH, instead of 220V / 3 PH
Round Tube:
Straight Cut: 10-1/8" or 10.125"
45° Left Cut: 7"
45° Right Cut: 8-1/4" or 8.25"
60° Right Cut: 5-1/8" or 5.125"
Square Tube:
Straight Cut: 9-3/4" or 9.75"
45° Left Cut: 6"
45° Right Cut: 7-3/4" or 7.75"
60° Right Cut: 5-1/8" or 5.125"
Rectangular Tube:
Straight Cut: 7"H x 12-3/4"W or 7"H x 12.75"W
45° Left Cut: 2-1/4"H x 8-3/4"W or 2.25"H x 8.75"W
45° Right Cut: 6-1/4"H x 8-1/4"W or 6.25"H x 8.25"W
60° Right Cut: 5-1/8"H x 5-1/4"W or 5.125"H x 5.25"W
