S 411 CSO: Manual Band Saw with Automatic Head Descent and Variable Speed Inverter (11-3/4" Round Tube Capacity)

QUANTUM MACC S-411-CSO BAND SAW CUTTING CAPACITIES AND SPECIFICATIONS:

Round Tube:

• Straight Cut: 11-3/4" or 11.75"

• 45° Left Cut: 7"

• 45° Right Cut: 8-3/4" or 8.75"

• 60° Right Cut: 5-1/4" or 5.25"
   

Square Tube:

• Straight Cut: 11"

• 45° Left Cut: 6-1/8" or 6.125"

• 45° Right Cut: 8-1/4" or 8.25"

• 60° Right Cut: 5-1/4" or 5.25"
  
  
  
  Rectangular Tube:

• Straight Cut: 7-3/4"H x 15-1/2"W or 7.75"H x 15.5"W

• 45° Left Cut: 4-1/4"H x 7"W or 4.25"H x 7"W

• 45° Right Cut: 5-1/4"H x 8-3/4"W or 5.25"H x 8.75"W

• 60° Right Cut: 5-1/4"H x 5-1/4"W or 5.25"H x 5.25"W

• Band Saw machine with Automatic Bow/Head-Descent, controlled by a hydraulic circuit upon cutting. The “Bar-Feeding”, Vice Closure and Head Return are manually operated.

• Sawing machine with bow falling controlled by a hydraulic circuit upon cutting, bar feeding and vice closure manually operated, manual head return.

• Vertical rotation on bolt with adjustable tapered bearings without backlash.

• High-capacity band control by two-speed motor and special reducer with bronze gear tempered and ground worm screw.

• Appropriately dimensioned flywheels.

• Strong band guides with tight stress-raiser bearings and adjustable widia tips

• Band stretching is obtained by electro-mechanical blade tensioner with microswitch.

• Vice with a device for quick approach.

• Wide rotating material support table.

• Accident-preventing devices on the flywheel casing, on the control handle, and on the blade.

• Hydraulic cylinder for controlled descent.

• Removable chip collection tray.

• From 45° Left-Angled Cut up to 60° Right-Angled Cut.

• Adjustable stop for cuts of the same size.

• 24 V low tension plant.

• 0,06 kW power-driver pump for band cooling.

• Cutting Thickness: .047" (1.2 mm)

• Cutting Range: 45° left to 60° Right.

• Blade Size: 3,200 x 27 x 0.9 mm

• Maximum Vice Opening: 15.75" (400 mm)

• Machine Weight: 1,170 lbs. (530 kg)

• 2 Speeds: 38 - 77' per Minute

• This Saw Includes: Bar Stop, Bar Support Arm, Instruction Manual, Service Tools & 1 Band Saw Blade.

• Overall Dimensions (without Bar Stop): 6'-6"H x 5'-2"W x 6'L or 79”H x 26”W x 72”L or 2,006 mm H x 660 mm W x 1,829 mm L

• Overall Dimensions (with Bar Stop): 6'-6"H x 4'-3"W x 6'L or 79”H x 52”W x 72”L or 2,006 mm H x 1,321 mm W x 1,829 mm L

• Additionally, this Saw Includes: 1 Blade, Variable Speed Inverter, Pedal Controlled Pneumatic Vice, Digital Angle Reader and the Entry/Exit Side Support Brackets.

• Electrical Options Available: 220 Volt / 3 Phase or 480 Volt / 3 Phase