Spacer

NEW 350 EDV: 14" Manual Circular Cold Saw

DSC_3877.jpg
DSC_3905.jpg
DSC_3879.jpg
DSC_3881.jpg
DSC_3891.jpg
DSC_3901.jpg
DSC_3904.jpg
DSC_3906.jpg
DSC_3884.jpg
DSC_3886.jpg
DSC_3900.jpg
DSC_3887.jpg
DSC_3888.jpg
DSC_3890.jpg
DSC_3889.jpg
DSC_3894.jpg
DSC_3898.jpg
DSC_3892.jpg
DSC_3877.jpg
DSC_3905.jpg
DSC_3879.jpg
DSC_3881.jpg
DSC_3891.jpg
DSC_3901.jpg
DSC_3904.jpg
DSC_3906.jpg
DSC_3884.jpg
DSC_3886.jpg
DSC_3900.jpg
DSC_3887.jpg
DSC_3888.jpg
DSC_3890.jpg
DSC_3889.jpg
DSC_3894.jpg
DSC_3898.jpg
DSC_3892.jpg

NEW 350 EDV: 14" Manual Circular Cold Saw

4,300.00

$4,300

 

The Quantum Machinery NEW 350 EDV Manual Cold Saw has a moveable head that swivels 45 degrees left and 45 degrees right. The reduction unit is in an oil bath with a double hinged pin that has an eccentric bush. The NEW 350 EDV Cold Saw is equipped with a dual quick-locking vice and a sliding counter-vice for longitudinal cutting. Has a 0.035kW power-driven pump for band cooling, along with a coolant filter. This unit is also equipped with a Jet Separation System to keep the blade oiled, has a Bar Support Arm, and a Bar Stop. Manual, service tools and steel pedestal come with the machine. The NEW 350 EDV is to be equipped with a 350mm blade.

  • Maximum vice opening - 120mm (4.7")
  • This saw can run at 2 different speeds (40-80 R.P.M.)
  • Available in 220 Volt / 3 Phase / 60 Hz or 480 Volt / 3 Phase / 60 Hz
Add To Cart

NEW 350 EDV Cutting Capacities

  • Solid Round Cutting at 90 Degrees - 2.3"
  • Solid Round Cutting at 45 Degrees - 2.1"
  • Round Tube Cutting at 90 Degrees - 4.3"
  • Round Tube Cutting at 45 Degrees - 3.15"
  • Square Tube Cutting at 90 Degrees - 4"
  • Square Tube Cutting at 45 Degrees - 3.15"
  • Rectangular Tube Cutting at 90 Degrees - 4.7"W x 3.15"H
  • Rectangular Tube Cutting at 45 Degrees - 3.15"W x 3"H