TA 400-A: 15.75" Fully-Automatic Non-Ferrous, Aluminum Cutting Saw (5-1/2" Round Tube Capacity)

DSC_1421.jpg
DSC_1424.jpg
DSC_1425.jpg
DSC_1427.jpg
DSC_1472.jpg
DSC_1446.jpg
DSC_1429.jpg
DSC_1447.jpg
DSC_1450.jpg
DSC_1453.jpg
DSC_1478.jpg
DSC_1479.jpg
DSC_1481.jpg
DSC_1454.jpg
DSC_1455.jpg
DSC_1468.jpg
DSC_1475.jpg
DSC_1442.jpg
DSC_1444.jpg
DSC_1430.jpg
DSC_1431.jpg
DSC_1433.jpg
DSC_1434.jpg
DSC_1435.jpg
DSC_1437.jpg
DSC_1438.jpg
DSC_1441.jpg
DSC_1421.jpg
DSC_1424.jpg
DSC_1425.jpg
DSC_1427.jpg
DSC_1472.jpg
DSC_1446.jpg
DSC_1429.jpg
DSC_1447.jpg
DSC_1450.jpg
DSC_1453.jpg
DSC_1478.jpg
DSC_1479.jpg
DSC_1481.jpg
DSC_1454.jpg
DSC_1455.jpg
DSC_1468.jpg
DSC_1475.jpg
DSC_1442.jpg
DSC_1444.jpg
DSC_1430.jpg
DSC_1431.jpg
DSC_1433.jpg
DSC_1434.jpg
DSC_1435.jpg
DSC_1437.jpg
DSC_1438.jpg
DSC_1441.jpg

TA 400-A: 15.75" Fully-Automatic Non-Ferrous, Aluminum Cutting Saw (5-1/2" Round Tube Capacity)

18,900.00

Ready to place an order, or do you have any questions?
Call us at (909) 476-8007

The Quantum Macc TA 400-A Fully-Automatic Saw specializes in cutting solid or section bars made of aluminum or light alloys, and runs at 3,000 R.P.M. The blade holder shaft is on bearings with Teflon jaws to hold the piece steady and in place. Two pneumatic vices and bar support arm with bar stop allow you to have precise cuts.

  • Blade Speed: 3,000 R.P.M.

  • Weight: 1,125 lbs. (510 kg.)

  • Maximum Vice Opening: 7” (180mm)

  • Overall Dimensions: 150” Width x 63” Length x 67” Height (3800 x 1600 x 1700 mm)

  • Blade Size Used: 400 x 2.5 x 32mm Bore Carbide Tip

  • Cost Per 400mm Blade: $250 Each

Click Here to Pre-Order

TA 400-A CUTTING CAPACITIES:

Round Tube Cutting Capacities:

Round Tube Cutting at 90° (Straight Cut): 5-1/2"

Square Tube Cutting Capacities:

Square Tube Cutting at 90° (Straight Cut): 4-1/4"

Solid Round Cutting Capacities:

Solid Round Cutting at 90° (Straight Cut): 2-1/4"

Rectangular Tube Cutting Capacities:

Rectangular Tube Cutting at 90° (Straight Cut): 3-7/8" x 7"

TA 400-A SPECIFICATIONS:

— Blade Size Used: 400 x 2.5 x 32mm Bore Carbide Tip

— Cost Per 400mm Blade: $250 Each

— Blade Speed: 3,000 R.P.M.

— Weight: 1,125 lbs. (510 kg.)

— Maximum Vice Opening: 7” (180mm)

— Overall Dimensions: 150” Width x 63” Length x 67” Height (3800 x 1600 x 1700 mm)

REQUEST TA 400-A FULLY-AUTOMATIC, NON-FERROUS SAW QUOTE:

Name *
Name
Phone *
Phone
What is the material type , profile, and size (overall size and thickness) that you will be cutting? We ask this, only to ensure that this unit will be best suited for your applications, since we offer such a wide range of saws to choose from.